Genuine Can-Am Seat Back — OEM Part #708003802
Comfort and safety go hand in hand on a long ride. The genuine Can-Am Seat Back restores the factory seating and restraint system on your Defender HD10, mounting exactly where the original did.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 2 Can-Am models from 2025. See the full fitment list below.
Seat Back at a Glance
-
OEM part number: 708003802
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Seat Repair
-
Note: Includes 130 to 130d
-
Fits: Defender utility side-by-side models, 2025
-
Condition: New
Can-Am Models and Years This Seat Back Fits
Genuine Can-Am part #708003802 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender MAX HD10 Tex |
2025 |
| Can-Am Defender MAX HD10 Tex Cab |
2025 |
Why Choose a Genuine Can-Am OEM Seat Back?
- Factory fit with the original seat base, frame and mounts
- Restores BRP's designed rider support and restraint
- Weather-resistant materials for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #708003802
- Original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed Can-Am models
- Works with factory seat latches, belts and interlocks
Materials and Construction
Can-Am seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale
Signs Your Seat Back Needs Replacing
- Torn vinyl or waterlogged foam
- Belt webbing that is frayed, cut or faded
- Belts that do not retract or latch
- Seats that rock or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the Can-Am parts diagram to identify hardware and any belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install with the correct factory hardware.
- Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #708003802 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Seat Back with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Seat Back?
The genuine Can-Am part number is 708003802. Use it to match this part to your factory parts diagram. Note: includes 130 to 130d.
Which Can-Am models does part #708003802 fit?
It fits the Defender MAX HD10 Tex (2025); Defender MAX HD10 Tex Cab (2025).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory Can-Am seat and mounts on the listed models.
How do I keep vinyl seats from cracking?
Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.
Order Your Genuine Can-Am Seat Back Today
Get your Defender HD10 back to factory condition. Add the genuine Can-Am Seat Back (part #708003802) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.