Genuine CFMoto Self-Tapping Screw 4.8X13 — OEM Part #30118-480130010
Small parts hold big things together. The genuine CFMoto Self-Tapping Screw 4.8X13 is the exact factory fastener specified for your UForce models, with the correct size, thread, length, grade and finish, so it fits right and holds torque the way CFMoto engineered it.
OEM hardware is engineered for a specific location and load. Using the wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 5 CFMoto models from 2021 to 2025. See the full fitment list below.
Self-Tapping Screw 4.8X13 at a Glance
-
OEM part number: 30118-480130010
-
Brand: CFMOTO (genuine factory part)
-
Part type: OEM Screw
-
Fits: UForce utility UTV models, 2021–2025
-
Condition: New
CFMoto Models and Years This Self-Tapping Screw 4.8X13 Fits
Genuine CFMoto part #30118-480130010 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2025 |
| CFMoto UForce U10 Pro |
2025 |
| CFMoto UForce U10 Pro Highland |
2025 |
| CFMoto UForce U10XL Pro |
2025 |
| CFMoto UForce U10XL Pro Highland |
2025 |
Why Choose a Genuine CFMoto OEM Self-Tapping Screw 4.8X13?
- Exact factory size, thread pitch and length
- Correct strength grade for the location it is used in
- Factory corrosion-resistant finish
- No guessing at the hardware store or mixing metric sizes
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM hardware, part #30118-480130010
- Matches the original thread, length, head style and grade
- Zinc-plated or coated finish to resist corrosion (where applicable)
- Used across multiple CFMoto assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
CFMoto fasteners are made from heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, and finished with zinc or similar plating. Washers, clips and bushings are made from steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping a spare supply for common repairs
Signs Your Self-Tapping Screw 4.8X13 Needs Replacing
- Rounded heads or damaged threads
- Rust or corrosion that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that have already been reused
Installation Tips
- Check the CFMoto parts diagram to confirm the location and quantity you need.
- Clean the threads in the mating part, and chase damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #30118-480130010 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Self-Tapping Screw 4.8X13 and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Self-Tapping Screw 4.8X13 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Self-Tapping Screw 4.8X13?
The genuine CFMoto part number is 30118-480130010. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #30118-480130010 fit?
It fits the UForce 600 (2021–2025); UForce U10 Pro (2025); UForce U10 Pro Highland (2025); UForce U10XL Pro (2025); UForce U10XL Pro Highland (2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, thread pitch, length and finish often differ. For anything structural, such as suspension, brakes or engine parts, use the OEM fastener specified for that location.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity used at each location, and order enough to replace them all.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use. Replace them whenever they are removed.
Order Your Genuine CFMoto Self-Tapping Screw 4.8X13 Today
Get your UForce models back to factory condition. Add the genuine CFMoto Self-Tapping Screw 4.8X13 (part #30118-480130010) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.