Genuine Indian Shield-Heat Can — OEM Part #5266749-329
A blown gasket, loose heat shield or rusted muffler changes how an Indian sounds and can burn your leg. The genuine Indian Shield-Heat Can restores the factory exhaust on your Indian motorcycle, with the right fit, clearances and mounting.
Headpipes, mufflers, heat shields, clamps and gaskets route exhaust, control noise and protect the rider from heat. This part is confirmed for 21 Indian models from 2019 to 2021.
Shield-Heat Can at a Glance
-
OEM part number: 5266749-329
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Exhaust Shield
-
Indian fitment: Chief, Chieftain, Elite, Roadmaster and Springfield, 2019–2021
-
Condition: New
Models and Years This Shield-Heat Can Fits
Genuine part #5266749-329 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Chief Dark Horse |
2019–2020 |
| Indian Chief Vintage |
2019–2020 |
| Indian Chief Vintage Dark Horse 111 |
2021 |
| Indian Chief Vintage Premium 111 |
2021 |
| Indian Chieftain |
2019 |
| Indian Chieftain Classic |
2019–2020 |
| Indian Chieftain Dark Horse |
2019–2020 |
| Indian Chieftain Elite |
2020 |
| Indian Chieftain Limited |
2019 |
| Indian Chieftain Premium |
2020 |
| Indian Chieftain Standard |
2020 |
| Indian Chieftain Standard Thunder Black |
2020 |
| Indian Chieftain Standard Titanium Smoke |
2020 |
| Indian Elite |
2019 |
| Indian Roadmaster |
2019 |
| Indian Roadmaster Dark Horse |
2020 |
| Indian Roadmaster Elite |
2019–2020 |
| Indian Roadmaster Premium |
2020 |
| Indian Springfield |
2019 |
| Indian Springfield Dark Horse |
2019–2021 |
| Indian Springfield Limited |
2020 |
Why Choose a Genuine Indian OEM Shield-Heat Can?
- Factory fit, clearance and sound
- Works with the original EFI calibration
- Protects legs and bodywork from heat
- Uses the original hangers and clamps
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM exhaust part, part #5266749-329
- Original mounting points and pipe routing
- Chrome or black finish to match (where applicable)
- Designed for the listed Indian models
- Pairs with OEM gaskets and clamps
Materials and Construction
Indian exhaust parts use steel or stainless steel pipes and mufflers with chrome or ceramic-black finishes, stamped heat shields and multi-layer exhaust gaskets.
Common Reasons Riders Replace This Part
- Fixing ticking or puffing from an exhaust leak
- Replacing a dented, rusted or blued muffler
- Tightening rattling heat shields
- Returning to stock after aftermarket pipes
Signs Your Shield-Heat Can Needs Replacing
- Ticking or puffing sound at the head
- Rattle from heat shields
- Rust, blueing or peeling chrome
- Soot around joints
- Hot spots near your leg
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil before loosening.
- Always use new exhaust gaskets at the heads.
- Fit everything loosely, align, then tighten front to back.
- Run the engine and check for leaks and rattles.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5266749-329 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shield-Heat Can with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Shield-Heat Can?
The genuine part number is 5266749-329. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #5266749-329 fit?
It fits 21 Indian models (Chief, Chieftain, Elite, Roadmaster and Springfield) from 2019 to 2021. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
Do I need new gaskets?
Yes. Exhaust gaskets crush on install and rarely reseal.
Will stock pipes need a tune?
Returning to factory pipes usually works with the factory map. If the bike was tuned for aftermarket pipes, reset the tune.
How do I clean burnt rubber off chrome?
Our blog has a step-by-step guide.
Order Your Genuine Indian Shield-Heat Can Today
Keep your Indian motorcycle on the road. Add the genuine Indian Shield-Heat Can (part #5266749-329) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.