Shifter Shaft / Clutch Arm Shaft Seal by James Gaskets

Victory Motorcycle Shift Shaft Seal (Part #12045-DL) - Prevent Leaks, Restore Performance

Is your beloved Victory Motorcycle leaving its mark on your garage floor? Don't let a leaky shift shaft seal dampen your ride! The aftermarket shift shaft seal, part number 12045-DL, from Witchdoctors.com is your ultimate solution to stop those notorious oil leaks and ensure your Victory rides as smoothly and cleanly as it should. Engineered for superior performance and durability, this essential component is designed to restore your motorcycle's integrity and keep you confidently cruising down the road.

At Witchdoctors.com, we understand the passion Victory owners have for their machines. That's why we meticulously source and offer only the highest quality aftermarket parts, like this precision-engineered shift shaft seal. Say goodbye to unsightly drips and hello to a leak-free, high-performing ride!

Why Your Victory Motorcycle Shift Shaft Seal May Need Replacing

The shift shaft seal plays a critical role in preventing oil from escaping the transmission where the shift shaft enters the engine case. Over time, these seals can deteriorate, leading to various issues. Here are several common reasons why your Victory Motorcycle's shift shaft seal might be failing and require replacement:

• Age and Material Degradation: Like any rubber or synthetic component, seals are subject to wear and tear. Heat cycles, exposure to oils, and general age can cause the seal material to harden, crack, or lose its elasticity, compromising its ability to seal effectively.
• Mileage and Vibration: High mileage accumulates significant operational hours and vibrations, which can gradually wear down the seal surface and the shaft it seals against.
• Contamination and Debris: Microscopic particles of dirt, grit, or metal shavings in the oil can act as abrasive agents, slowly grinding away at the seal lip and causing premature failure.
• Improper Installation (Previous Replacement): If a previous seal replacement wasn't done correctly, the new seal could be damaged during installation, leading to early failure.
• Extreme Temperatures: Prolonged exposure to very high or low temperatures can accelerate the breakdown of the seal's material, making it brittle or soft.
• Side Impacts or Collisions: Even minor impacts to the shift lever or surrounding area can sometimes cause stress on the shaft and the seal, leading to damage.
• Shaft Wear or Scratches: The shift shaft itself can develop grooves or scratches over time, creating pathways for oil to escape, even with a new seal in place. While less common, it's worth inspecting the shaft during replacement.

Identifying a leak early and replacing the Victory motorcycle shift shaft seal promptly can save you from more extensive repairs down the line. Look for oil weeping or dripping around the shift lever area – it's a clear sign it's time for a new seal!

Premium Features & Benefits

Our aftermarket shift shaft seal (12045-DL) is designed to meet or exceed OEM specifications, offering a robust and reliable solution for your Victory.

• Superior Sealing Performance: Crafted from high-quality, oil-resistant materials, this seal provides a tight, long-lasting barrier against oil leaks, keeping your transmission fluid where it belongs.
• Enhanced Durability: Engineered to withstand the harsh operating conditions of your motorcycle, including temperature fluctuations and constant friction from the shift shaft.
• Precision Fit: Manufactured to exact specifications for a perfect fit on your Victory, ensuring straightforward installation and optimal function.
• Cost-Effective Solution: A high-quality aftermarket alternative that delivers exceptional performance without the premium price tag of OEM parts.
• Peace of Mind: Ride with confidence knowing that your motorcycle is free from unsightly and potentially damaging oil leaks.

Built for Your Victory

This shift shaft seal (12045-DL) is a direct replacement for your original Victory motorcycle seal, compatible with a wide range of Victory models. Whether you ride a Cross Country, Vegas, Vision, or any other Victory, this seal is an essential part of maintaining your motorcycle's drivetrain integrity. Don't compromise on quality when it comes to your ride's performance and longevity.

Easy Installation, Lasting Results

While professional installation is always recommended for critical engine components, experienced DIY enthusiasts can perform this replacement with the right tools and knowledge. Ensure you consult your Victory service manual for specific removal and installation procedures. Pairing this new seal with a thorough cleaning of the shift shaft area will further enhance its sealing longevity.

Frequently Asked Questions (FAQs)

Q: How do I know if my shift shaft seal is leaking? A: The most common sign is oil weeping or dripping from the area where your shift lever enters the engine case on the left side of your motorcycle. You might see oil accumulation on the bottom of the engine case or on your garage floor after parking.

Q: Is this an OEM part? A: This is a high-quality aftermarket component (part number 12045-DL) specifically designed to be a direct replacement for the original Victory Motorcycle shift shaft seal, meeting or exceeding OEM standards for fit and function.

Q: Can a leaking shift shaft seal cause serious damage? A: While a minor leak might seem like just a nuisance, prolonged or significant leaks can lead to low transmission fluid levels, affecting shifting performance and potentially causing premature wear to internal transmission components. It's always best to address leaks promptly.

Q: Do I need any special tools to replace this seal? A: While a basic set of motorcycle tools will get you started, specialized seal pullers and drivers can make the job easier and reduce the risk of damaging the new seal or surrounding components during installation. Refer to your service manual for recommended tools.

Q: What other parts should I consider replacing when I do this job? A: It's often a good idea to inspect the shift shaft itself for any wear or pitting. Some riders also opt to replace the shift shaft bearing or the clutch arm shaft seal, as these components are in close proximity and can also contribute to leaks.

Don't let a small leak turn into a big problem!

Invest in the peace of mind that comes with a high-quality, durable shift shaft seal for your Victory Motorcycle. Click "Add to Cart" now and get your part from Witchdoctors.com – your trusted source for premium Victory aftermarket parts. Stop the leaks, restore your ride, and get back to enjoying the open road!

Fitment Disclosure

This fitment information is provided to you based on the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and other important application information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the information provided.

General Safety Warning

Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Witchdoctors Billet Specialties LLC accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email: Fitment@buywitchdoctors.com

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.