Badge

Snap Ring 7710434 by Polaris

Price
$4.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 7710434
In stock and ready for shipping

SKU: 7710434

Genuine Polaris Snap Ring — OEM Part #7710434

Put power to the ground reliably with a genuine Polaris Snap Ring. Built for the Polaris ATV or side-by-side, it matches the original splines, bearings and housings, so it works with your transmission and On-Demand AWD front gearcase where equipped.

The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 378 Polaris models from 2003 to 2026. See the full fitment list below.

Snap Ring at a Glance

  • OEM part number: 7710434
  • Brand: Polaris (genuine factory part)
  • Part type: Gearcase Assembly
  • Fits: General crossover side-by-side, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV, Sportsman ATV, Trail Blazer ATV, Trail Boss ATV and Xpedition adventure side-by-side models, 2003–2026
  • Condition: New

Polaris Models and Years This Snap Ring Fits

Genuine Polaris part #7710434 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 378 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Polaris General crossover side-by-side Fitment

Model Family Model Years Trims
Polaris General 1000 2020–2026 16
Polaris General XP 2021–2026 25

Polaris RZR sport side-by-side Fitment

Model Family Model Years Trims
Polaris RZR 2025 1
Polaris RZR 64 2021 1
Polaris RZR 570 2020 1
Polaris RZR 900 2020–2026 7
Polaris RZR 1000 2020–2021 1
Polaris RZR PRO 2020–2026 58
Polaris RZR RS1 2019–2022 3
Polaris RZR S 2020 1
Polaris RZR S4 2020 1
Polaris RZR Trail 2020–2026 8
Polaris RZR Trctr 2025 1
Polaris RZR Turbo 2019–2024 18
Polaris RZR XP 2018–2026 30
Polaris RZR Xp4 2019 2

Polaris Ranger utility side-by-side Fitment

Model Family Model Years Trims
Polaris Ranger 2019–2020, 2023 3
Polaris Ranger 500 2019–2022, 2026 5
Polaris Ranger 530 2023–2025 1
Polaris Ranger 570 2019–2026 26
Polaris Ranger 902D 2020–2022 3
Polaris Ranger 1000 2018–2026 53
Polaris Ranger Back 2020 2
Polaris Ranger Diesel 2022–2026 6
Polaris Ranger EV 2023–2024 7
Polaris Ranger FC 2020 2
Polaris Ranger HD 2020 1
Polaris Ranger High 2019–2020 2
Polaris Ranger Is 2020 1
Polaris Ranger MD 2024–2025 1
Polaris Ranger MS 2025–2026 2
Polaris Ranger Northstar 2018–2020 12
Polaris Ranger RC 2020 2
Polaris Ranger SP 2026 1
Polaris Ranger Texas 2020 1
Polaris Ranger Tx 2020 1
Polaris Ranger Winter 2020 2
Polaris Ranger XP 2019, 2021–2026 52

Polaris Scrambler ATV Fitment

Model Family Model Years Trims
Polaris Scrambler 2x4 2008–2009 1
Polaris Scrambler 500 2003–2012 2

Polaris Sportsman ATV Fitment

Model Family Model Years Trims
Polaris Sportsman 6x6 2003–2008 1

Polaris Trail Blazer ATV Fitment

Model Family Model Years Trims
Polaris Trail Blazer 2004–2006 1
Polaris Trail Blazer 250 2003 1
Polaris Trail Blazer 330 2008–2013 1
Polaris Trail Blazer 400 2003 1

Polaris Trail Boss ATV Fitment

Model Family Model Years Trims
Polaris Trail Boss 330 2003–2013 2

Polaris Xpedition adventure side-by-side Fitment

Model Family Model Years Trims
Polaris Xpedition Adv 2024–2026 4
Polaris Xpedition XP 2024–2026 2
Polaris Xpedition Xp5 2024–2026 2

Why Choose a Genuine Polaris OEM Snap Ring?

  • Exact gear, spline and bearing fit
  • Restores smooth, positive shifting and range selection
  • Designed for full engine torque and load
  • Lowers the risk of repeat failures
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support

Features and Materials

Key Features

  • Genuine Polaris OEM drivetrain part, part #7710434
  • Machined to Polaris's original specifications
  • Hardened surfaces where applicable
  • Matches factory seals, bearings and mounting
  • Designed for the listed Polaris models

Materials and Construction

Polaris drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.

Common Reasons Riders Replace This Part

  • Fixing grinding, popping out of gear or hard shifting
  • Rebuilding transmissions, gearcases and differentials
  • Fixing AWD/4WD engagement problems
  • Repairing leaks and vibration from drive shafts and U-joints

Signs Your Snap Ring Needs Replacing

  • Grinding, clunking or whining
  • Popping out of gear or trouble selecting range
  • Vibration that grows with speed
  • Oil leaks at seals, covers or gearcases
  • AWD that will not engage or release

Installation Tips

  1. Drain transmission or gearcase fluid before disassembly.
  2. Follow the Polaris service manual for shimming, preload and torque specs.
  3. Replace seals, O-rings and gaskets you disturb.
  4. Lubricate gears and bearings with the specified fluid during assembly.
  5. Refill with the correct fluid and amount, then test-ride and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Polaris Parts Diagrams for Your Machine

Find part #7710434 and every part installed with it in the factory Polaris parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Snap Ring with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Polaris Snap Ring?

The genuine Polaris part number is 7710434. Use it to match this part to your factory parts diagram.

Which Polaris models does part #7710434 fit?

It fits 378 Polaris General, RZR, Ranger, Scrambler, Sportsman, Trail Blazer, Trail Boss and Xpedition models from 2003 to 2026. The complete list is in the fitment tables above.

Is this a genuine Polaris part?

Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.

What fluid should I use?

Use the transmission and gearcase fluids in your Polaris owner's manual. The wrong fluid can cause wear and engagement problems.

Should I replace bearings and seals during a rebuild?

Yes. They are inexpensive compared to labor.

Can a bad drivetrain part damage other components?

Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.

Order Your Genuine Polaris Snap Ring Today

Ride with confidence on parts built for your machine. Order the genuine Polaris Snap Ring, OEM part #7710434, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.

Where to Ride Your Polaris

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: