Spark Plug Wires Black & Red by Trik Wires
They are designed to be the perfect length to show them off without the need to tie them to your frame. They can be used with or without triangular chrome side covers for coil and ignition (cheese wedges)
Frequently Asked Questions:
Will the wires make more power?
You probably won't notice it unless you have had engine work done or if you put your bike on a dyno. Only then will the benefits of the 8mm Taylor wires be noticed. They are more for looks, but they do perform better than the stock wires.
Do I need to modify anything to get them to fit?
These are direct replacements and these actually fit better than stock as the plug boots are smaller and easier to remove. The old wires were zip tied to the frame where these ones do not need to be. You want these to hang down some to be seen. TrikWires are made to specific lengths to ensure a nice fit. Some people have made small clearance notches in the back side of thier chrome triangular "cheese wedge" covers. This is not needed but some wanted to do this. You can run your bike without the cheese wedges for an even better look if so desired...
What bikes will they fit?
These wires will fit 2002 and newer Victory bikes with the newer style "Freedom" engine. All models are included except the older engined bikes. I have tried to make wires for the older 99-02 Victory bikes with the "Hammer" engine with no luck. It seems Victory used a few different coil connector types and the boot into the top of the head is very expensive. I will not be making any of these wires for the older bikes. Additionally I make Victory Vision wires too, but these may take slightly longer due to different coil boots and connectors.
How do I take care of the wires?
The solid colored wires are made of high temp silicone and only need a wipe. I heat shrink my braided wires with a new crystal clear heat shrink that will not haze. I would recommend wiping the wires off if any fuel or oil gets on them to keep them looking thier best, but they will resist most chemicals and heat.
- Victory Boardwalk 2013-2015
- Victory Cross Country Tour 2012-2017
- Victory Cross Country, Cross Country 8 Ball 2010-2017
- Victory Cross Roads, Cross Roads Classic, Cross Roads 8 Ball 2010-2014
- Victory Gunner 2015-2017
- Victory Hammer, Hammer S, Hammer 8 Ball 2008-2017
- Victory Hardball 2012-2013
- Victory Highball 2012-2017
- Victory Jackpot, Jackpot Ness 2008-2016
- Victory Judge 2013-2017
- Victory Kingpin, Kingpin Tour, Kingpin 8, Ball Kingpin Low 2008-2012
- Victory Magnum 2015-2017
- Victory Vegas, Vegas 8 Ball, Vegas Low, Vegas Ness 2008-2017
- Victory Vision, Vision Street, Vision Ness, Vision Tour, Vision Premium 2008-2017
- Victory X1 2015-2017
This fitment information is provided to you based on the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and other important application information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the information provided.
GENERAL SAFETY WARNING
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Witchdoctors Billet Specialties LLC accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email: Fitment@buywitchdoctors.com
Qualifying Retail orders $99.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.
These wires are no longer manufactured with the 90 degree boot. Both coil boots are straight and they will function the same as the 90 degree boot. Final product may or may not exactly match the image.