Genuine CFMoto Sponge Pad — OEM Part #9010-120008
Keep the cab on your CFMoto ATV or UTV tight, quiet and weather-resistant with a genuine CFMoto Sponge Pad. It is engineered to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab components keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece can cause rattles, leaks and safety problems. This part is confirmed for 36 CFMoto models from 2007 to 2025. See the full fitment list below.
Sponge Pad at a Glance
-
OEM part number: 9010-120008
-
Brand: CFMOTO (genuine factory part)
-
Part type: Cab Frame
-
Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2007–2025
-
Condition: New
CFMoto Models and Years This Sponge Pad Fits
Genuine CFMoto part #9010-120008 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 110 |
2023–2024 |
| CFMoto CForce 400 |
2022–2023, 2025 |
| CFMoto CForce 400 S |
2024 |
| CFMoto CForce 500 |
2008–2009, 2022–2023 |
| CFMoto CForce 500 LWB |
2007–2008 |
| CFMoto CForce 500 S |
2024–2025 |
| CFMoto CForce 500 SWB |
2007–2008, 2013–2016 |
| CFMoto CForce 500 X5 LWB |
2010–2012 |
| CFMoto CForce 500 X5 SWB |
2010–2012 |
| CFMoto CForce 600 |
2020–2024 |
| CFMoto CForce 600 LWB |
2013–2014 |
| CFMoto CForce 600 Touring |
2020–2025 |
| CFMoto CForce 600 X6 LWB |
2010–2012 |
| CFMoto CForce 600 X6 SWB |
2010–2012 |
| CFMoto CForce 800 |
2017 |
| CFMoto CForce 800 Touring |
2024–2025 |
| CFMoto CForce 800 X8 |
2013–2016 |
| CFMoto CForce 800 XC |
2019–2024 |
| CFMoto CForce 1000 |
2023–2024 |
| CFMoto CForce 1000 Overland |
2021–2022, 2025 |
| CFMoto CForce 1000 Touring |
2024–2025 |
| CFMoto CForce EV110 |
2024 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2023 |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 500 |
2016–2017, 2019–2022 |
| CFMoto ZForce 800 EX |
2014–2022 |
| CFMoto ZForce 800 Trail |
2015–2023, 2025 |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2023, 2025 |
| CFMoto ZForce 950 Sport 4 |
2025 |
| CFMoto ZForce 950 Trail |
2023 |
| CFMoto ZForce 1000 |
2018–2019 |
Why Choose a Genuine CFMoto OEM Sponge Pad?
- Factory fit with the cab frame, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Maintains the structural integrity CFMoto designed into the cab
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM cab part, part #9010-120008
- Built to original CFMoto dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish for a clean, factory look
- Designed for the vibration and flex of off-road use
Materials and Construction
CFMoto cab components use materials matched to the job: powder-coated or e-coated steel for frame and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels. Each is chosen to survive vibration, moisture and sun.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not stay latched
- Sealing out dust and water on a cab-enclosed machine
- Restoring a machine to factory condition for resale
Signs Your Sponge Pad Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken cab pieces after an impact
- Seals that are torn, flattened or hardened
- Corrosion or broken welds on frame components
Installation Tips
- Pull up the CFMoto parts diagram for the cab to see how the part fits and which hardware it uses.
- Support doors, glass or the roof before loosening any hardware so nothing drops.
- Clean mounting surfaces and check surrounding parts for damage.
- Install the new part with all bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9010-120008 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Sponge Pad and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Sponge Pad with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Sponge Pad?
The genuine CFMoto part number is 9010-120008. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9010-120008 fit?
It fits 36 CFMoto CForce, UForce and ZForce models from 2007 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this part fit a cab with aftermarket doors or windows?
It is designed for the factory CFMoto cab on the listed models. Aftermarket doors, roofs and glass may use different mounting points, so check with the accessory maker before ordering.
Do I need special tools to install cab parts?
Most cab parts install with common hand tools. Large panels, doors and glass are much easier with a second person to hold them in place.
Is the cab frame safe to repair after a rollover?
Bent or cracked structural parts should be replaced, not straightened. If you are unsure, have the cab inspected before riding again.
Order Your Genuine CFMoto Sponge Pad Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Sponge Pad, OEM part #9010-120008, from Witchdoctors today and keep your CFMoto ATV or UTV running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.