Spring 708000921 by Can-Am

Genuine Can-Am Spring — OEM Part #708000921

Comfort and safety go hand in hand on a long ride. The genuine Can-Am Spring restores the factory seating and restraint system on your Can-Am ATV or side-by-side, mounting exactly where the original did.

Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 32 Can-Am models from 2012 to 2020. See the full fitment list below.

Spring at a Glance

• OEM part number: 708000921
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Seat Repair
• Fits: Commander crossover side-by-side and Maverick sport side-by-side models, 2012–2020
• Condition: New

Can-Am Models and Years This Spring Fits

Genuine Can-Am part #708000921 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Commander crossover side-by-side Fitment

Can-Am Maverick sport side-by-side Fitment

Why Choose a Genuine Can-Am OEM Spring?

• Factory fit with the original seat base, frame and mounts
• Restores BRP's designed rider support and restraint
• Weather-resistant materials for outdoor use
• Keeps safety systems working as intended
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM part, part #708000921
• Original mounting points and hardware
• UV- and water-resistant covers and webbing (where applicable)
• Designed for the listed Can-Am models
• Works with factory seat latches, belts and interlocks

Materials and Construction

Can-Am seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.

Common Reasons Riders Replace This Part

• Replacing torn or worn seat covers and cushions
• Replacing frayed, cut or sun-damaged belts
• Fixing loose or broken seat mounts and latches
• Restoring a machine for resale

Signs Your Spring Needs Replacing

• Torn vinyl or waterlogged foam
• Belt webbing that is frayed, cut or faded
• Belts that do not retract or latch
• Seats that rock or will not lock in place
• Broken nets, buckles or mounts

Installation Tips

1. Use the Can-Am parts diagram to identify hardware and any belt interlock wiring.
2. Remove the old part, noting how belts and wiring are routed.
3. Install with the correct factory hardware.
4. Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
5. Test latches, retractors and interlocks before riding.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #708000921 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2020 Can-Am Commander 800R EFI parts diagrams
• 2020 Can-Am Commander 1000R EFI parts diagrams
• 2020 Can-Am Commander MAX 800R EFI parts diagrams
• 2020 Can-Am Commander MAX 1000R EFI parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Front Window Net, Left (#707900237)
• Can-Am Front Window Net, Right (#707900238)
• Can-Am Seat Rail, Left (#708003314)
• Can-Am Nylon Insert Hex Lock Nut 7/16-20 (#250100135)
• Can-Am Passenger Buckle Side (#708002062)
• Can-Am Buckle Driver Side (#708002061)

Recommended Accessories and Maintenance Supplies

Pair your Spring with these parts and supplies:

• UTV seat belts and harnesses — Belts and harnesses
• Replacement seats and covers — Seat covers and seats
• UTV grab handles — Passenger grab handles
• Seat and leather care — Cleaners and protectants
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Seats Buyer’s Guide: Comfort & Safety for the Trail
• How to Inspect & Replace UTV Seat Belts | Safety Tech Tip
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Spring?

The genuine Can-Am part number is 708000921. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #708000921 fit?

It fits 32 Can-Am Commander and Maverick models from 2012 to 2020. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Should seat belts be replaced after an accident?

Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.

Will this fit an aftermarket seat?

It is designed for the factory Can-Am seat and mounts on the listed models.

How do I keep vinyl seats from cracking?

Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.

Order Your Genuine Can-Am Spring Today

Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Spring (part #708000921) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Sand Flats Recreation Area — Moab, Utah: home of Hell's Revenge and other slickrock trails
• Spearhead Trails — southwest Virginia: a multi-trail system across the Virginia coalfields