Genuine CFMoto Starter Motor Cable — OEM Part #5BY0-150220
Electrical gremlins are some of the most frustrating problems to chase. The genuine CFMoto Starter Motor Cable plugs into your ZForce 950 with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 4 CFMoto models from 2020 to 2024. See the full fitment list below.
Starter Motor Cable at a Glance
-
OEM part number: 5BY0-150220
-
Brand: CFMOTO (genuine factory part)
-
Part type: Battery Cable
-
Fits: ZForce sport UTV models, 2020–2024
-
Condition: New
CFMoto Models and Years This Starter Motor Cable Fits
Genuine CFMoto part #5BY0-150220 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2022 |
Why Choose a Genuine CFMoto OEM Starter Motor Cable?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, dash and diagnostics
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM electrical part, part #5BY0-150220
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed CFMoto models
- No splicing or adapters needed
Materials and Construction
CFMoto electrical parts use tinned copper conductors, weather-sealed connectors with silicone seals, heat- and abrasion-resistant insulation and loom, and potted or sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent electrical faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring dash functions and warning lights
Signs Your Starter Motor Cable Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging or voltage problems
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable before working on electrical parts.
- Use the CFMoto parts diagram and wiring diagram to confirm routing and connectors.
- Inspect connectors for corrosion and clean them with electrical contact cleaner.
- Install the new part, making sure every connector clicks fully and seals.
- Route and secure wiring away from heat and moving parts, then test operation.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5BY0-150220 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Starter Motor Cable and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Starter Motor Cable with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Starter Motor Cable?
The genuine CFMoto part number is 5BY0-150220. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5BY0-150220 fit?
It fits the ZForce 950 EX (2022); ZForce 950 HO EX (2022–2024); ZForce 950 HO Sport (2022–2023); ZForce 950 Sport (2020–2022).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in electrical parts do not. Some control modules or keys may need dealer programming. Check your service manual or call us before ordering.
How can I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults come from a loose ground or corroded connector, not a failed part.
Should I use dielectric grease on connectors?
A light coat on connector seals can help keep water out. Follow your service manual for your specific connectors.
Order Your Genuine CFMoto Starter Motor Cable Today
Get your ZForce 950 back to factory condition. Add the genuine CFMoto Starter Motor Cable (part #5BY0-150220) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.