Genuine CFMoto Steering Column — OEM Part #7000-100001
Steer with confidence again with a genuine CFMoto Steering Column. Built for the CFMoto ATV or UTV, this OEM part matches the factory splines, joints and mounting points, so the steering feels tight and returns to center the way it did when new.
The steering wheel or handlebars, column, rack, tie rods and electronic power steering (EPS) all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 14 CFMoto models from 2014 to 2025. See the full fitment list below.
Steering Column at a Glance
-
OEM part number: 7000-100001
-
Brand: CFMOTO (genuine factory part)
-
Part type: Steering Column
-
Fits: UForce utility UTV and ZForce sport UTV models, 2014–2025
-
Condition: New
CFMoto Models and Years This Steering Column Fits
Genuine CFMoto part #7000-100001 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2024 |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2019–2024 |
| CFMoto UForce 1000 XL |
2022–2024 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 500 |
2016–2022 |
| CFMoto ZForce 800 EX |
2014–2022 |
| CFMoto ZForce 800 Trail |
2015–2024 |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2024 |
| CFMoto ZForce 950 Sport 4 |
2024 |
| CFMoto ZForce 950 Trail |
2023–2024 |
| CFMoto ZForce 1000 |
2018–2019 |
Why Choose a Genuine CFMoto OEM Steering Column?
- Factory fit with the original rack, column and linkage
- Restores tight, precise steering feel
- Works with CFMoto EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM steering part, part #7000-100001
- Matches original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed CFMoto models
- Works with factory EPS units, sensors and wiring where applicable
Materials and Construction
CFMoto steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and, for EPS systems, sealed motors and electronic modules designed for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing EPS faults or a heavy steering feel
- Restoring steering on a high-hour machine
Signs Your Steering Column Needs Replacing
- Free play or looseness in the steering
- Clunking or knocking when turning
- Heavy steering or an EPS warning light
- Bent tie rods or a steering wheel off center
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight and lock the steering before disconnecting parts.
- Use the CFMoto parts diagram for hardware, cotter pins and EPS connectors.
- Disconnect the battery before working on EPS components.
- Install the new part, matching the original spline position or tie-rod length.
- Torque to spec, set toe, and check full lock-to-lock travel before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #7000-100001 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Steering Column and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Steering Column with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Steering Column?
The genuine CFMoto part number is 7000-100001. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #7000-100001 fit?
It fits 14 CFMoto UForce and ZForce models from 2014 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Do I need an alignment after replacing steering parts?
Yes. Tie rods and steering components affect toe. Set it after installation to prevent wander and tire wear.
Does the EPS need to be calibrated?
Some CFMoto EPS systems need a reset or calibration after service. Check your service manual or ask a dealer.
Is this part safe to straighten instead of replace?
No. Bent steering parts should always be replaced. Straightened parts can fail without warning.
Order Your Genuine CFMoto Steering Column Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Steering Column, OEM part #7000-100001, from Witchdoctors today and keep your CFMoto ATV or UTV running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.