Genuine Victory Front Stop Brake Switch — OEM Part #4110242
Brakes are the last part you want to compromise on. The genuine Victory Front Stop Brake Switch restores factory stopping power on your Victory motorcycle, matching the original fittings, dimensions and ABS components where equipped.
Calipers, master cylinders, lines, pads, rotors and ABS parts work as one hydraulic system. A worn or wrong part leads to a soft lever, noise or brake failure. This part is confirmed for 8 Victory models from 1999 to 2007.
Front Stop Brake Switch at a Glance
-
OEM part number: 4110242
-
Brand: Victory (genuine Polaris-made OEM part)
-
Part type: Brake Light Switch
-
Victory fitment: Hammer, Jackpot, Kingpin, V92 and Vegas, 1999–2007
-
Condition: New
Models and Years This Front Stop Brake Switch Fits
Genuine part #4110242 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Hammer |
2005–2007 |
| Victory Jackpot |
2006–2007 |
| Victory Kingpin |
2004–2007 |
| Victory V92 C |
2000–2003 |
| Victory V92 CA Classic Cruiser |
2003 |
| Victory V92 SC |
1999–2002 |
| Victory V92 TC |
2003–2006 |
| Victory Vegas |
2003–2007 |
Why Choose a Genuine Victory OEM Front Stop Brake Switch?
- Factory hydraulic specification and feel
- Direct fit with original calipers, lines and mounts
- Compatible with Victory ABS where equipped
- Restores safe, predictable stopping
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory OEM brake part, part #4110242
- Original fittings, banjo bolts and mounting
- Built to Victory's brake specification
- Designed for the listed Victory models
- Works with the DOT fluid in your manual
Materials and Construction
Victory brake parts use steel rotors, sintered or organic pads, aluminum calipers and master cylinders with DOT-compatible seals, and reinforced or braided brake lines.
Common Reasons Riders Replace This Part
- Fixing a soft or spongy lever or pedal
- Replacing leaking calipers, lines or master cylinders
- Replacing worn pads or warped rotors
- Repairing ABS wheel speed sensors and rings
Signs Your Front Stop Brake Switch Needs Replacing
- Spongy lever or pedal
- Squealing, grinding or pulsing
- Fluid leaks or dark fluid
- Rotors below minimum thickness
- ABS warning light
Installation Tips
- Use the Victory parts diagram to confirm fittings and crush washers.
- Protect paint from brake fluid and cap open lines.
- Torque banjo bolts and caliper bolts to spec with new washers.
- Refill with fresh DOT fluid and bleed fully (ABS models may need a specific procedure).
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #4110242 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Stop Brake Switch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Front Stop Brake Switch?
The genuine part number is 4110242. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #4110242 fit?
It fits 8 Victory models (Hammer, Jackpot, Kingpin, V92 and Vegas) from 1999 to 2007. See the Victory fitment table above.
Does part #4110242 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type on the reservoir cap and in your manual. Never mix silicone DOT 5 with DOT 4.
Why is my ABS light on?
A failed wheel speed sensor is a common cause. Our blog covers diagnosis.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Order Your Genuine Victory Front Stop Brake Switch Today
Keep your Victory motorcycle on the road. Add the genuine Victory Front Stop Brake Switch (part #4110242) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views
-
Going-to-the-Sun Road — Glacier National Park, Montana: about 50 miles across the Continental Divide