Badge

Thrust Washer 0.446x.88x.02 3234642 by Polaris

Price
$12.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 3234642
In stock and ready for shipping

SKU: 3234642

Genuine Polaris Thrust Washer 0.446x.88x.02 — OEM Part #3234642

Small parts hold big things together. The genuine Polaris Thrust Washer 0.446x.88x.02 is the exact factory fastener specified for your Polaris ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.

OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 544 Polaris models from 2009 to 2026. See the full fitment list below.

Thrust Washer 0.446x.88x.02 at a Glance

  • OEM part number: 3234642
  • Brand: Polaris (genuine factory part)
  • Part type: OEM Washer
  • Fits: ACE single-seat, General crossover side-by-side, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV, Sportsman ATV and Xpedition adventure side-by-side models, 2009–2026
  • Condition: New

Polaris Models and Years This Thrust Washer 0.446x.88x.02 Fits

Genuine Polaris part #3234642 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 544 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Polaris ACE single-seat Fitment

Model Family Model Years Trims
Polaris ACE 325 2016 1
Polaris ACE 500 2017–2019 1
Polaris ACE 570 2016–2019 8
Polaris ACE 900 2016–2019 2

Polaris General crossover side-by-side Fitment

Model Family Model Years Trims
Polaris General 1000 2016–2026 22
Polaris General XP 2020–2026 27

Polaris RZR sport side-by-side Fitment

Model Family Model Years Trims
Polaris RZR 2025 1
Polaris RZR 64 2021 1
Polaris RZR 570 2019–2020 2
Polaris RZR 900 2018–2026 10
Polaris RZR 1000 2018–2021 4
Polaris RZR PRO 2020–2026 58
Polaris RZR RS1 2019–2022 3
Polaris RZR S 2020 1
Polaris RZR S4 2020 1
Polaris RZR Trail 2020–2026 8
Polaris RZR Trctr 2025 1
Polaris RZR Turbo 2019–2024 18
Polaris RZR XP 2018–2026 31
Polaris RZR Xp4 2019 2

Polaris Ranger utility side-by-side Fitment

Model Family Model Years Trims
Polaris Ranger 2015, 2019–2020, 2023 3
Polaris Ranger 6P 2017 1
Polaris Ranger 500 2017–2022, 2026 7
Polaris Ranger 530 2023–2025 1
Polaris Ranger 570 2014–2026 37
Polaris Ranger 900 2011–2019 11
Polaris Ranger 902D 2020–2022 3
Polaris Ranger 1000 2015–2026 58
Polaris Ranger Back 2020 2
Polaris Ranger Diesel 2014, 2022–2026 9
Polaris Ranger ETX 2015–2016 1
Polaris Ranger EV 2023–2024 7
Polaris Ranger FC 2020 2
Polaris Ranger HD 2020 1
Polaris Ranger High 2019–2020 2
Polaris Ranger Hst 2015–2017 1
Polaris Ranger Is 2020 1
Polaris Ranger MD 2018, 2024–2025 2
Polaris Ranger MS 2025–2026 2
Polaris Ranger Northstar 2018–2020 12
Polaris Ranger RC 2020 2
Polaris Ranger SP 2026 1
Polaris Ranger Texas 2020 1
Polaris Ranger Tx 2020 1
Polaris Ranger Winter 2020 2
Polaris Ranger XP 2014, 2017–2019, 2021–2026 55

Polaris Scrambler ATV Fitment

Model Family Model Years Trims
Polaris Scrambler 850 2013–2026 6
Polaris Scrambler 1000 2014–2019, 2022–2026 6
Polaris Scrambler HO 2013 1
Polaris Scrambler XP 2014–2018, 2020–2021, 2026 7

Polaris Sportsman ATV Fitment

Model Family Model Years Trims
Polaris Sportsman 2015 2
Polaris Sportsman 48" 2020 1
Polaris Sportsman 550 2010–2014 3
Polaris Sportsman 850 2014–2026 15
Polaris Sportsman 1000 2015–2019, 2023–2026 7
Polaris Sportsman ACE 2014–2015 8
Polaris Sportsman Forest 2011–2012 2
Polaris Sportsman Touring 2010–2026 16
Polaris Sportsman X2 2010–2014 4
Polaris Sportsman XP 2009–2026 31

Polaris Xpedition adventure side-by-side Fitment

Model Family Model Years Trims
Polaris Xpedition Adv 2024–2026 4
Polaris Xpedition XP 2024–2026 2
Polaris Xpedition Xp5 2024–2026 2

Why Choose a Genuine Polaris OEM Thrust Washer 0.446x.88x.02?

  • Exact factory size, thread pitch and length
  • Correct strength grade for its location
  • Factory corrosion-resistant finish
  • No guessing at sizes or grades
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support

Features and Materials

Key Features

  • Genuine Polaris OEM hardware, part #3234642
  • Matches the original thread, length, head style and grade
  • Plated or coated to resist corrosion (where applicable)
  • Used across several Polaris assemblies, as listed in the fitment table
  • Ideal for replacing lost, stripped or one-time-use fasteners

Materials and Construction

Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.

Common Reasons Riders Replace This Part

  • Replacing hardware lost on the trail
  • Replacing stretched, rusted or stripped fasteners
  • Rebuilds that call for new one-time-use hardware
  • Keeping spares for common repairs

Signs Your Thrust Washer 0.446x.88x.02 Needs Replacing

  • Rounded heads or damaged threads
  • Rust that weakens the fastener
  • Missing hardware that leaves a part loose
  • Bolts that will not hold torque
  • Self-locking nuts or one-time bolts that were already reused

Installation Tips

  1. Check the Polaris parts diagram for the location and quantity you need.
  2. Clean the threads in the mating part, chasing damaged threads with a tap if needed.
  3. Apply thread locker or anti-seize only where the service manual specifies.
  4. Start the fastener by hand to avoid cross-threading.
  5. Tighten to the factory torque spec with a calibrated torque wrench.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Polaris Parts Diagrams for Your Machine

Find part #3234642 and every part installed with it in the factory Polaris parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Thrust Washer 0.446x.88x.02 with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Polaris Thrust Washer 0.446x.88x.02?

The genuine Polaris part number is 3234642. Use it to match this part to your factory parts diagram.

Which Polaris models does part #3234642 fit?

It fits 544 Polaris ACE, General, RZR, Ranger, Scrambler, Sportsman and Xpedition models from 2009 to 2026. The complete list is in the fitment tables above.

Is this a genuine Polaris part?

Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.

Can I use a hardware-store bolt instead?

It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.

Is this sold individually?

This listing is for the part number shown. Check the parts diagram for the quantity at each location.

Should I reuse self-locking nuts?

No. Self-locking and torque-to-yield fasteners are designed for one use.

Order Your Genuine Polaris Thrust Washer 0.446x.88x.02 Today

Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Thrust Washer 0.446x.88x.02 (part #3234642) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Polaris

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: