Brake Fluid & Coolant Test Strip Kit by Witchdoctors

Essential Protection: UTV, ATV and Motorcycle Brake Fluid & Coolant Test Strips - Available at buywitchdoctors.com

Professional Grade Fluid Diagnostic Strips

Visual inspections of your reservoir are often misleading. While fluid might look "clean," its chemical integrity could be compromised. Brake fluid and coolant test strips provide a scientific way to identify hidden issues before they lead to expensive component failure or dangerous system malfunctions. At Witchdoctors, we offer high-accuracy diagnostic strips designed for the high-performance cooling and hydraulic systems found in modern motorcycles, UTVs, and ATVs.

The Science of Fluid Degradation

Fluids in powersports vehicles are subject to extreme heat cycles and environmental contamination. Transitioning from "guessing" to "testing" helps you catch two primary silent killers of engine and brake performance:

• Brake Fluid Copper Content: Over time, the protective additives in brake fluid deplete, allowing the internal copper lines and components to corrode. These strips measure parts per million (ppm) of copper, signaling exactly when a flush is required to prevent ABS module failure.
• Coolant pH & Freeze Point: Coolant becomes acidic over time, which eats away at aluminum radiators and water pump seals. Test strips verify the corrosion protection levels and ensure your freeze point is low enough for winter storage.
• Moisture Contamination: Since brake fluid is hygroscopic (absorbs water), test strips help identify if moisture has lowered your boiling point, which causes brake fade during aggressive riding.

Why Diagnostic Strips are Vital for Powersports

Unlike passenger cars, off-road vehicles and motorcycles often sit for extended periods or operate in high-dust and high-moisture environments. Consequently, fluids can break down based on age and exposure rather than just mileage. Using brake fluid and coolant test strips allows you to catch acidity or copper buildup early. This will save you save thousands in potential repairs to your calipers, master cylinders, and engine gaskets.

Simple 60-Second Diagnostic Process

You don't need a degree in chemistry to protect your ride. The process is straightforward and can be done during any routine oil change:

1. Dip: Submerge the strip into the master cylinder or radiator (ensure the engine is cool).
2. Wait: Allow the reaction to occur for the time specified on the packaging (usually 30–60 seconds).
3. Compare: Match the color change to the provided chart to determine if your fluid is "Good," "Marginal," or "Requires Service."

For more information and checking your brake fluid or coolant click here.

What to do if you have corrosive brake fluid or coolant.

There are a few options to correct the corrosive brake fluid or coolant. First, we don't recommend leaving high levels of corrosion inside a brake system as that can lead to premature failure and expensive repairs. ABS units are now in the thousands to replace. When it comes to a brake system, preventative maintenance is the best and least expensive method to provide safety, confidence and longevity.

Kit includes:

• 3- Test Strips
• 1- Rating Scale Card