Fresh plugs are the cheapest horsepower you can buy. The NGK Iridium IX Spark Plug DCPR6EIX (part code DCPR6EIX) brings back crisp throttle response, smooth idle and easy starting, with NGK’s original-equipment quality.
Witchdoctors stocks genuine NGK spark plugs by NGK part code and stock number. Check the fitment below, confirm the code against your owner’s manual or current plug, and order with confidence.
Why Choose the NGK Iridium IX Spark Plug DCPR6EIX
NGK Iridium IX plugs use an ultra-fine iridium center electrode. NGK says it is 25% smaller than a platinum electrode and one quarter the size of a conventional nickel electrode. The smaller tip needs less voltage to fire, which improves ignitability and throttle response and can extend ignition system life. Iridium is also extremely hard and has a very high melting point, so it resists wear.
Key Features and Benefits
- Ultra-fine iridium center electrode
- Lower voltage requirement and stronger, more consistent spark
- Improved throttle response and cold starting
- Trivalent metal shell plating for anti-corrosion and anti-seize
- Long service life from wear-resistant iridium
Specifications
-
Brand: NGK Spark Plugs
-
NGK part code: DCPR6EIX
-
Plug type: Iridium IX
-
Thread diameter: 12 mm (D)
-
Hex: 5/8" hex (C)
-
Insulator: Projected insulator tip (P), which helps the plug self-clean and resist fouling
-
Resistor: Built-in resistor (R), which suppresses radio-frequency interference with electronics
-
Heat range: 6 (NGK scale: lower numbers are hotter, higher numbers are colder)
-
Thread reach: 19 mm (3/4") (E)
-
Center electrode: Iridium IX fine-wire iridium center electrode (IX)
-
Quantity: sold individually unless noted otherwise
How to Read the NGK Code DCPR6EIX
NGK part codes describe the plug. The first letter gives the thread diameter (A = 18 mm, B = 14 mm, C = 10 mm, D = 12 mm), and the letters after it describe the construction: C or K for a 5/8" hex, M for a compact shell, P for a projected insulator, R for a resistor. The number is the heat range. The letter after the number is the thread reach (E = 19 mm, H = 12.7 mm, L = 11.2 mm, F = tapered seat), followed by design letters. A number after the dash means a wide gap, for example -9 = .036" and -11 = .044". Iridium IX plugs add “IX”, and a “SOLID” suffix means a solid terminal. The decoded values for DCPR6EIX are in the specifications above.
What Heat Range Means
Heat range describes how quickly a plug transfers heat from its firing tip into the cylinder head. On NGK’s scale, a lower number is a hotter plug and a higher number is a colder plug. A plug that runs too cold fouls with carbon, and one that runs too hot can overheat and cause pre-ignition. Stick to the heat range your manufacturer specifies unless a tuner recommends a change for a modified engine, high-altitude riding or racing.
Fitment and Compatibility
Witchdoctors catalog fitment (models and years): Victory Steel-Frame Cruisers 2008–2017; Victory Cross Bikes 2010–2017; Victory Vision 2008–2017.
Multi-cylinder engines need one plug per cylinder, and some V-twins use two plugs per cylinder, so check how many your engine takes before ordering. Engines that have been modified, such as big-bore, high-compression or turbo builds, may need a different heat range or gap.
Signs It’s Time for New Spark Plugs
- Hard starting, especially when cold
- Rough or hunting idle
- Misfires, stumbling or hesitation under acceleration
- Reduced power and fuel economy
- Fouled, worn or eroded electrodes at inspection
- Reaching the service interval in your owner’s manual
Installation Tips
- Let the engine cool completely, and blow debris away from the plug wells with compressed air before you remove the old plugs.
- Check the gap with a wire-type gauge. Iridium and platinum plugs come pre-gapped. If you must adjust, bend only the ground electrode and never pry against the fine center electrode.
- Thread the plug in by hand to avoid cross-threading.
- Tighten to the torque in your service manual. NGK notes that its trivalent plating means anti-seize is generally not needed, and anti-seize can lead to over-tightening.
- Reinstall the plug cap or coil until it clicks firmly onto the terminal.
A spark plug wire boot puller makes removing tight caps easier without damaging the wires.
Reading Your Old Plugs
-
Tan or light gray: normal. The engine and heat range are well matched.
-
Black and sooty: running rich, excessive idling, a dirty air filter, or a plug that is too cold.
-
Wet or oily: oil consumption from worn rings or valve seals, or a flooded engine.
-
White or blistered: running lean, ignition timing too far advanced, or a plug that is too hot. Investigate before riding hard.
Complete Your Tune-Up
Browse all NGK plugs in our NGK spark plug collection, the Victory and Indian spark plugs and wires collection and ignition components.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Is DCPR6EIX the same plug as my original?
If your owner’s manual or current plug shows the same NGK code, yes. If your original is another brand, use a cross-reference and confirm the thread, reach, hex and heat range before installing.
How often should I replace my spark plugs?
Follow the interval in your owner’s manual. Iridium and laser iridium plugs typically last much longer than standard nickel plugs, but off-road, high-rpm and racing use shortens the life of any plug.
Can I upgrade from a standard plug to Iridium IX?
In many applications NGK offers an Iridium IX plug in the same heat range. It is a popular upgrade for crisper throttle response and easier starting. Match the heat range, thread and reach to the original.
Do I need to gap the plug?
Check the gap against your manual. Many plugs come pre-gapped. On iridium plugs, never touch the center electrode when checking or adjusting the gap.
Should I use anti-seize?
NGK states that its trivalent metal plating provides anti-seize protection, so anti-seize is generally unnecessary and can cause over-tightening. If you use it, reduce the torque accordingly.
Where to Ride
Fresh plugs, a crisp throttle and a full tank. Here are two places to put them to work:
Order Your NGK Iridium IX Spark Plug DCPR6EIX Today
Restore easy starts and a strong spark. Add the NGK Iridium IX Spark Plug DCPR6EIX (part code DCPR6EIX) to your cart, and Witchdoctors will ship genuine NGK plugs fast. Not sure which plug you need? Contact our team with your year, make and model.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.