Genuine Victory & Polaris Nylok Nut — OEM Part #7547268
Worn fork seals, tired shocks or a bent triple tree make a Victory wallow and wander. The genuine Victory & Polaris Nylok Nut restores the factory ride and steering on your Victory motorcycle or Polaris off-road vehicle.
Forks, triple trees, shocks, swingarms and steering bearings control how the bike steers, absorbs bumps and carries weight. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Nylok Nut at a Glance
-
OEM part number: 7547268
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Swingarm Repair
-
Victory fitment: Cross Country, Cross Roads, Hardball, Magnum and X1, 2010–2017
-
Polaris off-road fitment: RZR and Ranger, 2013–2023
-
Condition: New
Models and Years This Nylok Nut Fits
Genuine part #7547268 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Cross Country |
2010–2017 |
| Victory Cross Country Tour |
2010–2017 |
| Victory Cross Roads |
2010–2014 |
| Victory Hardball |
2012–2013 |
| Victory Magnum |
2015–2017 |
| Victory X1 |
2015–2016 |
Polaris Off-Road Vehicle Fitment
77 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris RZR |
2014–2023 |
27 |
| Polaris Ranger |
2013–2019 |
50 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Nylok Nut?
- Factory geometry and handling
- Restores original ride height and damping
- Correct seal, bushing and bearing fit
- Built for full touring and passenger loads
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM suspension part, part #7547268
- Original dimensions and mounting points
- Corrosion-resistant finish where applicable
- Designed for the listed Victory & Polaris models
- Works with factory fork oil, seals and hardware
Materials and Construction
Victory suspension parts use chromed steel fork tubes, aluminum fork legs and triple clamps, steel swingarms, and shocks with oil damping and air or coil springs.
Common Reasons Riders Replace This Part
- Fixing leaking fork seals
- Restoring damping on worn shocks
- Replacing parts bent in a crash
- Fixing a headshake or clunk at the steering head
Signs Your Nylok Nut Needs Replacing
- Oil on fork tubes or brake rotor
- Bouncy or harsh ride
- Clunk when braking
- Headshake or wandering
- Visible bends or pitting on fork tubes
Installation Tips
- Support the bike securely with the front or rear unloaded.
- Follow the Victory service manual for fork oil level and torque specs.
- Replace seals and bushings as a set.
- Torque axle and pinch bolts in the specified order.
- Check steering lock-to-lock and test-ride gently.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7547268 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Nylok Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Nylok Nut?
The genuine part number is 7547268. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #7547268 fit?
It fits the Victory Cross Country (2010–2017); Victory Cross Country Tour (2010–2017); Victory Cross Roads (2010–2014); Victory Hardball (2012–2013); Victory Magnum (2015–2017); Victory X1 (2015–2016).
Does part #7547268 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 77 Polaris off-road models, including the RZR and Ranger. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
What fork oil should I use?
Use the weight and level in your manual. Our blog has a guide to choosing Victory and Indian fork oil.
Should I replace both fork seals?
Yes. Replace seals in pairs so both legs damp evenly.
Can a bent fork tube be straightened?
No. Replace bent tubes and triple clamps.
Order Your Genuine Victory & Polaris Nylok Nut Today
Keep your Victory motorcycle or Polaris off-road vehicle or Polaris off-road vehicle on the road. Add the genuine Victory & Polaris Nylok Nut (part #7547268) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Great River Road — Minnesota and the Mississippi River: river-town miles in Polaris country
-
Blue Ridge Parkway — Virginia & North Carolina: 469 miles of mountain curves with no commercial traffic