Genuine Victory & Polaris Saddlebag Expansion Clip — OEM Part #7081304
Keep your Victory Vision ready for the long haul with a genuine Victory & Polaris Saddlebag Expansion Clip. It matches Victory's original bags and mounts, so lids close cleanly, locks line up and water stays out.
Saddlebags, trunks, lids, bins, latches and mounts have to hold gear securely at highway speed and keep out rain and road spray. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Saddlebag Expansion Clip at a Glance
-
OEM part number: 7081304
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Saddlebag Repair
-
Victory fitment: Vision, 2008–2017
-
Polaris off-road fitment: RZR and Sportsman, 2008–2026
-
Condition: New
Models and Years This Saddlebag Expansion Clip Fits
Genuine part #7081304 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Vision |
2008–2017 |
| Victory Vision Tour |
2008–2017 |
Polaris Off-Road Vehicle Fitment
85 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris RZR |
2020–2026 |
80 |
| Polaris Sportsman |
2008–2013 |
5 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Saddlebag Expansion Clip?
- Factory fit with the original bags, lids and mounts
- Restores latching, locking and sealing
- Painted or finished to match where applicable
- Keeps touring capacity intact
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM luggage part, part #7081304
- Original hinge, latch and mounting points
- Weather seals and gaskets where applicable
- Designed for the listed Victory & Polaris models
- Works with factory locks and keys where equipped
Materials and Construction
Victory bags and trunks use impact-resistant painted plastics or composite shells, steel and aluminum mounts, and rubber seals for weather protection.
Common Reasons Riders Replace This Part
- Replacing a cracked lid or bin after a tip-over
- Fixing lids that will not latch or lock
- Stopping water leaks into the bags
- Restoring touring bags on a used bike
Signs Your Saddlebag Expansion Clip Needs Replacing
- Lids that pop open or will not latch
- Water inside the bags after rain
- Cracked bins, lids or mounts
- Broken hinges or latch mechanisms
- Torn or flattened seals
Installation Tips
- Empty the bag and remove it from the bike if needed.
- Use the Victory parts diagram to identify hinge, latch and mount hardware.
- Transfer locks, seals and reflectors you plan to reuse.
- Install and adjust the latch so the lid closes firmly and seals.
- Check the mounts are tight before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7081304 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Saddlebag Expansion Clip with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Saddlebag Expansion Clip?
The genuine part number is 7081304. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #7081304 fit?
It fits the Victory Vision (2008–2017); Victory Vision Tour (2008–2017).
Does part #7081304 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 85 Polaris off-road models, including the RZR and Sportsman. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
Will a lid fit my existing bin?
Lids and bins are model-specific. Check the fitment table and match the part number to your diagram.
Does this include the lock?
Only if the title says so. Locks and keys are usually separate parts.
How do I stop water getting in?
Replace worn seals and make sure the latch pulls the lid down evenly.
Order Your Genuine Victory & Polaris Saddlebag Expansion Clip Today
Victory parts get harder to find every year. Order the genuine Victory & Polaris Saddlebag Expansion Clip, OEM part #7081304, from Witchdoctors today and keep your Victory Vision running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.