Genuine Polaris Yoke Pin — OEM Part #3239553
Put power to the ground reliably with a genuine Polaris Yoke Pin. Built for the RZR PRO, it matches the original splines, bearings and housings, so it works with your transmission and On-Demand AWD front gearcase where equipped.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 30 Polaris models from 2022 to 2026. See the full fitment list below.
Yoke Pin at a Glance
-
OEM part number: 3239553
-
Brand: Polaris (genuine factory part)
-
Part type: Propeller / Drive Shaft Components
-
Fits: RZR sport side-by-side models, 2022–2026
-
Condition: New
Polaris Models and Years This Yoke Pin Fits
Genuine Polaris part #3239553 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR PRO |
2023 |
| Polaris RZR PRO Factory Armored LE Ultimate |
2025 |
| Polaris RZR PRO Lv |
2023 |
| Polaris RZR PRO R |
2022 |
| Polaris RZR PRO R 4 |
2022 |
| Polaris RZR PRO R 4 Dynamix |
2022 |
| Polaris RZR PRO R 4 Premium |
2024 |
| Polaris RZR PRO R 4 Sport |
2022–2023 |
| Polaris RZR PRO R 4 Ultimate |
2022, 2024 |
| Polaris RZR PRO R 4 Ultimate Tld |
2023 |
| Polaris RZR PRO R Dynamix |
2022 |
| Polaris RZR PRO R Factory Armored LE Ultimate |
2025 |
| Polaris RZR PRO R Premium |
2022–2024 |
| Polaris RZR PRO R Race |
2025–2026 |
| Polaris RZR PRO R Race H.O |
2026 |
| Polaris RZR PRO R Race Replica LE Evap |
2025 |
| Polaris RZR PRO R RC |
2023 |
| Polaris RZR PRO R Sport |
2022–2023, 2025 |
| Polaris RZR PRO R Ultimate |
2022–2026 |
| Polaris RZR PRO R Ultimate Tld |
2023 |
| Polaris RZR PRO R4 Factory Armored LE Ultimate |
2025 |
| Polaris RZR PRO R4 Lv |
2023 |
| Polaris RZR PRO R4 Race Replica LE Evap |
2025 |
| Polaris RZR PRO R4 RC |
2023 |
| Polaris RZR PRO R4 Sport |
2025 |
| Polaris RZR PRO R4 Ultimate |
2025–2026 |
| Polaris RZR PRO Race Replica LE Evap |
2025 |
| Polaris RZR PRO RC |
2023 |
| Polaris RZR PRO Sport |
2025 |
| Polaris RZR PRO Ultimate |
2025 |
Why Choose a Genuine Polaris OEM Yoke Pin?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM drivetrain part, part #3239553
- Machined to Polaris's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Polaris models
Materials and Construction
Polaris drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions, gearcases and differentials
- Fixing AWD/4WD engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Yoke Pin Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- AWD that will not engage or release
Installation Tips
- Drain transmission or gearcase fluid before disassembly.
- Follow the Polaris service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3239553 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Yoke Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Yoke Pin?
The genuine Polaris part number is 3239553. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3239553 fit?
It fits 30 Polaris RZR models from 2022 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What fluid should I use?
Use the transmission and gearcase fluids in your Polaris owner's manual. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine Polaris Yoke Pin Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Yoke Pin, OEM part #3239553, from Witchdoctors today and keep your RZR PRO running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.