Genuine Polaris 4-Position Key Switch — OEM Part #4081557
Restore reliable power and electronics with a genuine Polaris 4-Position Key Switch. Built for the Polaris ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 12 Polaris models from 2023 to 2026. See the full fitment list below.
4-Position Key Switch at a Glance
-
OEM part number: 4081557
-
Brand: Polaris (genuine factory part)
-
Part type: Ignition Switch
-
Fits: General crossover side-by-side, Scrambler ATV and Sportsman ATV models, 2023–2026
-
Condition: New
Polaris Models and Years This 4-Position Key Switch Fits
Genuine Polaris part #4081557 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris General crossover side-by-side Fitment
| Model |
Model Years |
| Polaris General 1000 Deluxe (International) |
2024–2026 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 1000 55" (International) |
2023 |
| Polaris Scrambler 1000 55" EPS (International) |
2023 |
| Polaris Scrambler XP 1000 (International) |
2023–2025 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 570 6x6 EPS LE (International) |
2023 |
| Polaris Sportsman 570 Touring SP (International) |
2023 |
| Polaris Sportsman 570 X2 (International) |
2023 |
| Polaris Sportsman 1000 55" (International) |
2023 |
| Polaris Sportsman Touring 570 EPS (International) |
2023 |
| Polaris Sportsman Touring XP 1000 (International) |
2024–2025 |
| Polaris Sportsman XP 1000 55" (International) |
2023 |
| Polaris Sportsman XP 1000 EPS (International) |
2024–2025 |
Why Choose a Genuine Polaris OEM 4-Position Key Switch?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #4081557
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your 4-Position Key Switch Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your 4-Position Key Switch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris 4-Position Key Switch?
The genuine Polaris part number is 4081557. Use it to match this part to your factory parts diagram.
Which Polaris models does part #4081557 fit?
It fits 12 Polaris General, Scrambler and Sportsman models from 2023 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris 4-Position Key Switch Today
Ride with confidence on parts built for your machine. Order the genuine Polaris 4-Position Key Switch, OEM part #4081557, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.