Genuine Polaris Adhesive Electric Wire — OEM Part #0453696
Hard starts, stalling and hesitation often trace back to the fuel system. The genuine Polaris Adhesive Electric Wire restores factory fuel delivery on your Polaris ATV or side-by-side, connecting to the original lines, fittings and wiring so it works with the factory fuel system.
Tanks, pumps, injectors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 5 Polaris models from 2007 to 2017. See the full fitment list below.
Adhesive Electric Wire at a Glance
-
OEM part number: 0453696
-
Brand: Polaris (genuine factory part)
-
Part type: Fuel Tank & Components
-
Fits: Outlaw ATV and Sportsman ATV models, 2007–2017
-
Condition: New
Polaris Models and Years This Adhesive Electric Wire Fits
Genuine Polaris part #0453696 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Outlaw ATV Fitment
| Model |
Model Years |
| Polaris Outlaw 90 |
2007–2014, 2016 |
| Polaris Outlaw 110 |
2016–2017 |
| Polaris Outlaw 110 MD (International) |
2017 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 90 |
2007–2014, 2016 |
| Polaris Sportsman 110 |
2016 |
Why Choose a Genuine Polaris OEM Adhesive Electric Wire?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM fuel part, part #0453696
- Original line sizes, connectors and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Polaris models
- Works with factory EFI or carbureted systems and EVAP parts
Materials and Construction
Polaris fuel parts use ethanol-resistant hose and seals, polyethylene or metal tanks, corrosion-resistant pump and injector parts, and fittings that seal under vibration.
Common Reasons Riders Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Adhesive Electric Wire Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first.
- Disconnect the battery before working on pumps or wiring.
- Use the Polaris parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Prime the system, check for leaks, then start the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #0453696 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Adhesive Electric Wire with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Adhesive Electric Wire?
The genuine Polaris part number is 0453696. Use it to match this part to your factory parts diagram.
Which Polaris models does part #0453696 fit?
It fits the Outlaw 90 (2007–2014, 2016); Outlaw 110 (2016–2017); Outlaw 110 MD (International) (2017); Sportsman 90 (2007–2014, 2016); Sportsman 110 (2016).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish injectors, pumps and carburetors. Use stabilizer for storage and drain old fuel.
Order Your Genuine Polaris Adhesive Electric Wire Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Adhesive Electric Wire (part #0453696) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Spearhead Trails — southwest Virginia: a multi-trail system across the Virginia coalfields
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network