Genuine Kawasaki Air Filter Case Seal — OEM Part #92093-0792
Off-road engines live and die by clean air. The genuine Kawasaki Air Filter Case Seal seals the intake on your Ridge exactly as the factory intended, keeping dust, water and grit out of the throttle body or carburetor and cylinders.
The intake path, from inlet to air box to throttle body or carburetor, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 18 Kawasaki models from 2024 to 2026. See the full fitment list below.
Air Filter Case Seal at a Glance
-
OEM part number: 92093-0792
-
Brand: Kawasaki (genuine factory part)
-
Part type: Airbox Components
-
Fits: Ridge ranch side-by-side models, 2024–2026
-
Condition: New
Kawasaki Models and Years This Air Filter Case Seal Fits
Genuine Kawasaki part #92093-0792 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Ridge ranch side-by-side Fitment
| Model |
Model Years |
| Kawasaki Ridge |
2026 |
| Kawasaki Ridge Crew |
2026 |
| Kawasaki Ridge Crew HVAC |
2025–2026 |
| Kawasaki Ridge Crew HVAC Camo |
2025–2026 |
| Kawasaki Ridge Crew Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Crew ST HVAC |
2026 |
| Kawasaki Ridge HVAC |
2024–2026 |
| Kawasaki Ridge HVAC Camo |
2025–2026 |
| Kawasaki Ridge Limited |
2024–2025 |
| Kawasaki Ridge Limited HVAC |
2024–2025 |
| Kawasaki Ridge Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Ranch Edition |
2024–2025 |
| Kawasaki Ridge ST HVAC |
2026 |
| Kawasaki Ridge XR Crew |
2025 |
| Kawasaki Ridge XR Crew HVAC |
2025 |
| Kawasaki Ridge XR Crew Limited HVAC |
2025 |
| Kawasaki Ridge XR Deluxe HVAC |
2025 |
| Kawasaki Ridge XR HVAC |
2024–2025 |
Why Choose a Genuine Kawasaki OEM Air Filter Case Seal?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition settings
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM intake part, part #92093-0792
- Molded to original air box and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
Kawasaki intake parts use rigid, heat-stable plastics for air box housings and lids, flexible rubber boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.
Common Reasons Owners Replace This Part
- Replacing a cracked air box, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine filter and wear-item replacement
- Fixing idle and performance problems from an air leak
Signs Your Air Filter Case Seal Needs Replacing
- Dust on the clean side of the air filter
- Cracks or splits in boots, ducts or the air box
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the air box after a crossing
Installation Tips
- Check the Kawasaki parts diagram for clamps, seals and duct routing.
- Remove the old part and clean dust from the air box and inlet.
- Install the new part, making sure every edge seals.
- Tighten clamps evenly without overtightening plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92093-0792 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Air Filter Case Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Air Filter Case Seal?
The genuine Kawasaki part number is 92093-0792. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92093-0792 fit?
It fits 18 Kawasaki Ridge models from 2024 to 2026. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
How often should I check my air filter?
After every dusty ride if possible, and replace or clean it at the interval in your owner's manual or sooner.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.
Will this change performance?
It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.
Order Your Genuine Kawasaki Air Filter Case Seal Today
Get your Ridge back to factory condition. Add the genuine Kawasaki Air Filter Case Seal (part #92093-0792) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.