Air Intake Inlet Pipe 0JYA-111001-10000 by CFMOTO

Genuine CFMoto Air Intake Inlet Pipe — OEM Part #0JYA-111001-10000

Off-road engines live and die by clean air. The genuine CFMoto Air Intake Inlet Pipe seals the intake on your UForce 1000 exactly as the factory intended, keeping dust, water and grit out of the throttle body and cylinders.

The intake path, from snorkel to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 1 CFMoto model from 2019. See the full fitment list below.

Air Intake Inlet Pipe at a Glance

• OEM part number: 0JYA-111001-10000
• Brand: CFMOTO (genuine factory part)
• Part type: Airbox Components
• Fits: UForce utility UTV models, 2019
• Condition: New

CFMoto Models and Years This Air Intake Inlet Pipe Fits

Genuine CFMoto part #0JYA-111001-10000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

Why Choose a Genuine CFMoto OEM Air Intake Inlet Pipe?

• Factory seal against dust, water and debris
• Correct airflow for the factory fuel and ignition mapping
• Direct fit with original clamps, ducts and mounts
• Helps prevent premature engine wear
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM intake part, part #0JYA-111001-10000
• Molded to original airbox and duct dimensions
• Heat- and fuel-vapor-resistant materials
• Designed for dusty, muddy and wet riding
• Works with factory air filters and sensors

Materials and Construction

CFMoto intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal against vibration, and filter media designed to trap fine dust while maintaining airflow.

Common Reasons Riders Replace This Part

• Replacing a cracked airbox, lid or intake boot
• Restoring the seal after water or mud intrusion
• Routine replacement of filters and wear items
• Fixing idle and performance problems from an air leak

Signs Your Air Intake Inlet Pipe Needs Replacing

• Dust or dirt on the clean side of the air filter
• Cracks or splits in boots, ducts or the airbox
• Rough idle, hesitation or a lean condition
• Whistling or sucking noises from the intake
• Water in the airbox after a crossing

Installation Tips

1. Check the CFMoto parts diagram for clamps, seals and duct routing.
2. Remove the old part and clean any dust from the airbox and throttle body inlet.
3. Install the new part, making sure every edge seals fully.
4. Tighten clamps evenly. Do not overtighten plastic fittings.
5. Start the engine and check for air leaks and a smooth idle.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #0JYA-111001-10000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Air Filter Assembly diagram — 2019 CFMoto UForce 1000

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the Air Intake Inlet Pipe and are often replaced at the same time:

• CFMoto Bolt M6x12 (#30006-060012870)
• CFMoto Air Filter Element (#5HYV-111130-1D00)
• CFMoto T Spacer Bushing (#9010-120310)
• CFMoto Clamp A17 (#30601-117010)
• CFMoto Screw (#30102-060016810)
• CFMoto Fuel Tank Rear Damper (#9010-120007)

Recommended Accessories and Maintenance Supplies

Pair your Air Intake Inlet Pipe with these parts and supplies:

• Air, fuel and oil filters — Filters for scheduled maintenance
• Air intakes and turbos — Intake upgrades and snorkel kits
• Engine sensors — TPS, MAP and other engine sensors
• Oil change kits — Pair your intake service with an oil change
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Troubleshooting ATV & UTV Airbox Leaks & Seals
• Signs of a Leaking UTV/ATV Intake Boot | Troubleshooting Guide
• Troubleshooting Your ATV or UTV Throttle Body
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Air Intake Inlet Pipe?

The genuine CFMoto part number is 0JYA-111001-10000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #0JYA-111001-10000 fit?

It fits the UForce 1000 (2019).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

How often should I check my air filter?

Check it often, after every dusty ride if possible. Replace it at the interval in your CFMoto manual, or sooner in harsh conditions.

Can an intake leak damage my engine?

Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly. Fix intake leaks right away.

Will this change my machine's performance?

It restores factory airflow and sealing. If you had a leak, you may notice a smoother idle and better throttle response.

Order Your Genuine CFMoto Air Intake Inlet Pipe Today

Get your UForce 1000 back to factory condition. Add the genuine CFMoto Air Intake Inlet Pipe (part #0JYA-111001-10000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Sand Flats Recreation Area — Moab, Utah: home of Hell's Revenge and other slickrock trails
• Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network