Airbox Hose 707800862 by Can-Am

Genuine Can-Am Airbox Hose — OEM Part #707800862

Breathe easy with a genuine Can-Am Airbox Hose. Designed for the Maverick Turbo, it fits the original airbox, ducts and clamps for a tight seal and the airflow your engine was calibrated for.

The intake path, from inlet to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 8 Can-Am models from 2020 to 2026. See the full fitment list below.

Airbox Hose at a Glance

• OEM part number: 707800862
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Airbox Components
• Fits: Maverick sport side-by-side models, 2020–2026
• Condition: New

Can-Am Models and Years This Airbox Hose Fits

Genuine Can-Am part #707800862 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Maverick sport side-by-side Fitment

Why Choose a Genuine Can-Am OEM Airbox Hose?

• Factory seal against dust, water and debris
• Correct airflow for the factory fuel and ignition mapping
• Direct fit with original clamps, ducts and mounts
• Helps prevent premature engine wear
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM intake part, part #707800862
• Molded to original airbox and duct dimensions
• Heat- and fuel-vapor-resistant materials
• Designed for dusty, muddy and wet riding
• Works with factory air filters and sensors

Materials and Construction

Can-Am intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.

Common Reasons Riders Replace This Part

• Replacing a cracked airbox, lid or intake boot
• Restoring the seal after water or mud intrusion
• Routine filter and wear-item replacement
• Fixing idle and performance problems from an air leak

Signs Your Airbox Hose Needs Replacing

• Dust on the clean side of the air filter
• Cracks or splits in boots, ducts or the airbox
• Rough idle, hesitation or a lean condition
• Whistling or sucking noises from the intake
• Water in the airbox after a crossing

Installation Tips

1. Check the Can-Am parts diagram for clamps, seals and duct routing.
2. Remove the old part and clean dust from the airbox and throttle body inlet.
3. Install the new part, making sure every edge seals.
4. Tighten clamps evenly without overtightening plastic fittings.
5. Start the engine and check for air leaks and a smooth idle.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #707800862 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2026 Can-Am Maverick MAX Turbo RR X mr parts diagrams
• 2026 Can-Am Maverick Turbo RR X mr parts diagrams
• 2025 Can-Am Maverick MAX Turbo RR X mr 72" parts diagrams
• 2025 Can-Am Maverick Turbo RR X mr 64" parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Connecting Socket (#420267216)
• Can-Am Connecting Socket (#420867558)
• Can-Am Air Filter (#715900422)
• Can-Am Air Intake Manifold (#420867347)
• Can-Am Intake Gasket (#420450510)
• Can-Am Throttle Body (#420893149)

Recommended Accessories and Maintenance Supplies

Pair your Airbox Hose with these parts and supplies:

• Air, fuel and oil filters — Filters for scheduled maintenance
• Air intakes and turbos — Intake upgrades and snorkels
• Engine sensors — TPS, MAP and other sensors
• Oil change kits — Pair intake service with an oil change
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Sluggish Engine? Signs Your UTV Air Filter Is Clogged
• Troubleshooting ATV & UTV Airbox Leaks & Seals
• Signs of a Leaking UTV/ATV Intake Boot | Troubleshooting Guide
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Airbox Hose?

The genuine Can-Am part number is 707800862. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #707800862 fit?

It fits 8 Can-Am Maverick models from 2020 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

How often should I check my air filter?

After every dusty ride if possible, and replace it at the interval in your operator's guide or sooner.

Can an intake leak damage my engine?

Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.

Will this change performance?

It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.

Order Your Genuine Can-Am Airbox Hose Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Airbox Hose, OEM part #707800862, from Witchdoctors today and keep your Maverick Turbo running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Black Rock Adventure Park — Conneaut, Ohio: about 50 miles of trails
• Silver Lake State Park ORV Area — Mears, Michigan: 450 acres of open sand dunes on Lake Michigan