Genuine Victory Ignition Switch/Fuel Cap Lock & Keys, Silver — OEM Part #4011080-385
Keep fuel flowing the way Victory intended with the genuine Victory Ignition Switch/Fuel Cap Lock & Keys, Silver, Polaris part #4011080-385. It is the factory fuel system part for the Victory Hammer, Jackpot and other cruiser models.
The fuel tank, pump, lines and fittings deliver clean fuel at the right pressure. Leaks or weak delivery cause hard starts, stalling and a fire risk. This part is confirmed for 4 Victory models from 2006 to 2009. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Ignition Switch/Fuel Cap Lock & Keys, Silver at a Glance
-
OEM part number: 4011080-385
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Ignition / Fuel / Saddlebag Locks
-
Fits: Victory Cruiser models, 2006–2009
-
Condition: New
Victory Models and Years This Ignition Switch/Fuel Cap Lock & Keys, Silver Fits
Genuine Victory part #4011080-385 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Hammer |
2006–2009 |
| Victory Jackpot |
2006–2009 |
| Victory Kingpin |
2006–2009 |
| Victory Vegas |
2006–2009 |
Why Choose a Genuine Victory OEM Ignition Switch/Fuel Cap Lock & Keys, Silver?
- Leak-free fit with factory fittings and seals
- Correct pressure and flow for fuel injection
- Factory mounting points and shape
- Safer than universal hoses and fittings
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #4011080-385
- Fuel-resistant materials rated for ethanol blends
- Matches original connectors and mounts
- Direct replacement for the listed models
Materials and Construction
Victory fuel tanks are formed steel with a painted finish. Lines, seals and grommets use fuel-resistant rubber and nylon, and fittings are plated steel or aluminum.
Common Reasons Riders Replace This Part
- Fixing fuel leaks or odors
- Replacing a dented or damaged tank
- Fuel pump and filter service
- Bringing a stored Victory back to life
Signs Your Ignition Switch/Fuel Cap Lock & Keys, Silver Needs Replacing
- Fuel smell or wet spots near the tank or lines
- Hard starting or stalling
- Loss of power at higher speeds
- Cracked or hardened fuel hoses
Installation Tips
- Work in a ventilated area away from sparks and disconnect the battery.
- Relieve fuel pressure and drain or lower the fuel level.
- Install the new part with new seals or grommets.
- Route lines exactly as the originals, away from heat and sharp edges.
- Reconnect the battery, cycle the key to prime and check for leaks.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #4011080-385 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ignition Switch/Fuel Cap Lock & Keys, Silver with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
More Victory resources: Victory factory paint codes.
Frequently Asked Questions
What is the OEM part number for this Victory Ignition Switch/Fuel Cap Lock & Keys, Silver?
The genuine Polaris/Victory part number is 4011080-385. Use it to match this part to your factory parts diagram.
Which Victory models does part #4011080-385 fit?
It fits the Hammer (2006–2009); Jackpot (2006–2009); Kingpin (2006–2009); Vegas (2006–2009).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
Does this tank come painted?
Painted OEM tanks match the factory color listed in the title. Check our Victory paint code guide for your color.
How do I know if my fuel pump is failing?
Hard starting, stalling and low power are common signs. Our fuel pump guide explains how to test it.
Can I use ethanol fuel?
Victory systems are designed for pump fuels up to E10. Avoid higher blends unless your manual says otherwise.
Order Your Genuine Victory Ignition Switch/Fuel Cap Lock & Keys, Silver Today
Ride with confidence on parts made for your bike. Order the genuine Victory Ignition Switch/Fuel Cap Lock & Keys, Silver, OEM part #4011080-385, from Witchdoctors today and keep your Victory Hammer, Jackpot and other cruiser models running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.