Genuine Indian Rear Brake Caliper/Bracket — OEM Part #1912483-266
There is no room for guesswork with brakes. The genuine Indian Rear Brake Caliper/Bracket (part #1912483-266) restores the factory feel and stopping power of the Indian Scout and Scout Sixty.
Brakes are the most important safety system on your Indian. Calipers, masters, lines and pedals must be exact to give firm, predictable stopping power. This part is confirmed for 2 Indian models from 2015 to 2016. See the full fitment list below.
Availability note: This part is listed as discontinued or no longer available, and stock may be limited. See what to do when a part is no longer available or contact us for help finding a replacement.
Indian Rear Brake Caliper/Bracket at a Glance
-
OEM part number: 1912483-266
-
Brand: Indian Motorcycle (genuine OEM part)
-
Part type: Brake Caliper
-
Fits: Indian Scout models, 2015–2016
-
Condition: New
Indian Models and Years This Rear Brake Caliper/Bracket Fits
Genuine Indian part #1912483-266 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.
Indian Scout Fitment
| Model |
Model Years |
| Indian Scout |
2015–2016 |
| Indian Scout Sixty |
2016 |
Why Choose a Genuine Indian OEM Rear Brake Caliper/Bracket?
- Factory pedal and lever feel
- Correct fit for the original calipers and rotors
- Works with the factory ABS where equipped
- Safety you can trust on a heavy cruiser or bagger
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing
Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.
Features and Materials
Key Features
- Genuine Indian Motorcycle OEM part #1912483-266
- Matches original mounting and fittings
- Built for the weight and speed of an Indian
- Direct replacement for the listed models
Materials and Construction
Indian brake parts use cast aluminum calipers and master cylinders, stainless or reinforced brake lines, stainless rotors and forged or cast pedals.
Common Reasons Riders Replace This Part
- Brake system service and rebuilds
- Fixing a soft or spongy lever or pedal
- Replacing damaged lines or hardware
- Repairs after a tip-over
Signs Your Rear Brake Caliper/Bracket Needs Replacing
- Soft or spongy brake feel
- Fluid leaks at the caliper, master or lines
- Grinding or squealing when braking
- Bent pedal or damaged lever
Installation Tips
- Protect painted parts from brake fluid.
- Install the new part with new crush washers on banjo fittings.
- Fill with fresh fluid of the DOT type marked on the master cylinder cap.
- Bleed the system until the lever or pedal is firm, following the ABS procedure if equipped.
- Test the brakes at low speed before riding normally.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Indian Parts Diagrams for This Part
Find part #1912483-266 in the factory Indian parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Indian OEM Parts
Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Brake Caliper/Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Rear Brake Caliper/Bracket?
The genuine Indian Motorcycle part number is 1912483-266. Use it to match this part to your factory parts diagram.
Which Indian models does part #1912483-266 fit?
It fits the Indian Scout (2015–2016); Indian Scout Sixty (2016).
Is this a genuine Indian Motorcycle part?
Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.
How do I make sure this fits my bike?
Match part #1912483-266 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.
What brake fluid does my Indian use?
Use the DOT type printed on the master cylinder cap, usually DOT 4. Do not mix types.
Do ABS models bleed differently?
Some ABS models need a specific procedure. Check the service manual for your model.
Should I replace pads at the same time?
If pads are near the wear limit, replace them while the system is open.
Order Your Genuine Indian Rear Brake Caliper/Bracket Today
Ride with confidence on parts made for your bike. Order the genuine Indian Rear Brake Caliper/Bracket, OEM part #1912483-266, from Witchdoctors today and keep your Indian Scout and Scout Sixty running the way Indian designed it.
Where to Ride Your Indian
Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.