Genuine Victory Shift Roller Follower — OEM Part #1341402
Get crisp, comfortable control back with a genuine Victory Shift Roller Follower. Built for the Victory motorcycle, it fits the original perches, pivots and footrest mounts.
Handlebars, levers, cables, grips, floorboards, footpegs and shift and brake pedals set your riding position and control the bike. This part is confirmed for 20 Victory models from 2001 to 2017.
Shift Roller Follower at a Glance
-
OEM part number: 1341402
-
Brand: Victory (genuine Polaris-made OEM part)
-
Part type: Shifter
-
Victory fitment: Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, Octane, V92, Vegas, Vision and X1, 2001–2017
-
Condition: New
Models and Years This Shift Roller Follower Fits
Genuine part #1341402 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Boardwalk |
2013–2015 |
| Victory Cross Country |
2010–2017 |
| Victory Cross Country Tour |
2010–2017 |
| Victory Cross Roads |
2010–2014 |
| Victory Gunner |
2015–2017 |
| Victory Hammer |
2004–2017 |
| Victory Hardball |
2011–2014 |
| Victory Highball |
2012–2017 |
| Victory Jackpot |
2005–2017 |
| Victory Judge |
2013–2017 |
| Victory Kingpin |
2003–2017 |
| Victory Magnum |
2015–2017 |
| Victory Octane |
2017 |
| Victory V92 CA Classic Cruiser |
2003 |
| Victory V92 SC |
2001–2002 |
| Victory V92 TC |
2001–2006 |
| Victory Vegas |
2003–2017 |
| Victory Vision |
2008–2017 |
| Victory Vision Tour |
2008–2017 |
| Victory X1 |
2015–2017 |
Why Choose a Genuine Victory OEM Shift Roller Follower?
- Factory fit, reach and travel
- Correct cable length and routing
- Original mounting points with no modification
- Comfortable factory ergonomics
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory OEM control part, part #1341402
- Original mounting and adjustment
- Corrosion- and wear-resistant finish
- Designed for the listed Victory models
- Works with factory switches and cables
Materials and Construction
Victory controls use chromed or black steel and aluminum handlebars, levers and pedals, lined and sealed cables, and rubber or polymer pads and grips.
Common Reasons Riders Replace This Part
- Replacing parts bent in a tip-over
- Fixing a stretched or frayed cable
- Restoring stock ergonomics
- Replacing worn floorboard and peg rubbers
Signs Your Shift Roller Follower Needs Replacing
- Bent levers, pedals or bars
- Sticky or stretched throttle or clutch cable
- Worn or torn floorboard rubbers
- Sloppy shifter or brake pedal
- Excess free play
Installation Tips
- Use the Victory parts diagram for routing and hardware.
- Route new cables exactly like the originals.
- Set free play to the service manual spec.
- Check throttle return with the bars at full lock both ways.
- Test controls before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #1341402 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shift Roller Follower with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Shift Roller Follower?
The genuine part number is 1341402. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #1341402 fit?
It fits 20 Victory models (Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, Octane, V92, Vegas, Vision and X1) from 2001 to 2017. See the Victory fitment table above.
Does part #1341402 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.
How do I replace a throttle cable?
Our blog has a step-by-step guide for Victory throttle cables.
How do I measure handlebars?
See our guide to measuring motorcycle handlebars before ordering.
Are these the same on Indian?
Only if Indian models are listed in the fitment table.
Order Your Genuine Victory Shift Roller Follower Today
Victory parts get harder to find every year. Order the genuine Victory Shift Roller Follower, OEM part #1341402, from Witchdoctors today and keep your Victory motorcycle running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Beartooth Highway — Montana & Wyoming: switchbacks to nearly 11,000 feet near Yellowstone
-
Blue Ridge Parkway — Virginia & North Carolina: 469 miles of mountain curves with no commercial traffic