Genuine CFMoto Seat Back — OEM Part #5HY#-133000-1000
Comfort and safety go hand in hand on a long ride. The genuine CFMoto Seat Back restores the factory seating and restraint system on your UForce 1000, mounting exactly where the original did so it supports and protects riders as designed.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 2 CFMoto models from 2019 to 2025. See the full fitment list below.
Seat Back at a Glance
-
OEM part number: 5HY#-133000-1000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Seat Repair
-
Fits: UForce utility UTV models, 2019–2025
-
Condition: New
CFMoto Models and Years This Seat Back Fits
Genuine CFMoto part #5HY#-133000-1000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
Why Choose a Genuine CFMoto OEM Seat Back?
- Factory fit with the original seat base, frame and mounts
- Restores CFMoto's designed rider support and restraint
- Weather-resistant materials made for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #5HY#-133000-1000
- Matches the original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed CFMoto models
- Works with factory seat latches, belts and interlocks
Materials and Construction
CFMoto seating parts use UV-resistant marine-grade vinyl, closed-cell foam that resists water absorption, and steel or plastic seat bases. Safety belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale or a new owner
Signs Your Seat Back Needs Replacing
- Torn vinyl or waterlogged foam
- Seat belt webbing that is frayed, cut or faded
- Belts that do not retract or latch properly
- Seats that rock, slide or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the CFMoto parts diagram to identify mounting hardware and any seat-belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install the new part with the correct factory hardware.
- Torque seat-belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5HY#-133000-1000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Seat Back and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Seat Back with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Seat Back?
The genuine CFMoto part number is 5HY#-133000-1000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5HY#-133000-1000 fit?
It fits the UForce 1000 (2019–2025); UForce 1000 XL (2022–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that have restrained a rider in a crash or rollover can be stretched or damaged internally and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory CFMoto seat and mounts on the listed models. Aftermarket seats may need their own brackets.
How do I keep vinyl seats from cracking?
Keep them clean and use a UV protectant made for vinyl. Covering the machine when parked outside also helps a lot.
Order Your Genuine CFMoto Seat Back Today
Get your UForce 1000 back to factory condition. Add the genuine CFMoto Seat Back (part #5HY#-133000-1000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.