Genuine Kawasaki Ball Bearing, 6901 — OEM Part #92045-1246
Overheating can end a ride or a workday and ruin an engine. The genuine Kawasaki Ball Bearing, 6901 restores factory cooling performance on your Kawasaki ATV or side-by-side, with the exact fit, connections and flow the system was designed around.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 26 Kawasaki models from 2007 to 2026. See the full fitment list below.
Ball Bearing, 6901 at a Glance
-
OEM part number: 92045-1246
-
Brand: Kawasaki (genuine factory part)
-
Part type: Water Pumps & Components
-
Note: 6901
-
Fits: Brute Force ATV, KFX sport and youth ATV, Ridge ranch side-by-side and Teryx recreation side-by-side models, 2007–2026
-
Condition: New
Kawasaki Models and Years This Ball Bearing Fits
Genuine Kawasaki part #92045-1246 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 650 4x4 Hardwoods Green HD |
2007–2009 |
| Kawasaki Brute Force 650 4x4i |
2007–2013 |
| Kawasaki Brute Force 650 4x4i Hardwoods Green HD |
2007–2010 |
| Kawasaki Brute Force 750 4x4i |
2007 |
Kawasaki KFX sport and youth ATV Fitment
| Model |
Model Years |
| Kawasaki KFX 700 |
2007–2009 |
Kawasaki Ridge ranch side-by-side Fitment
| Model |
Model Years |
| Kawasaki Ridge |
2026 |
| Kawasaki Ridge Crew |
2026 |
| Kawasaki Ridge Crew HVAC |
2025–2026 |
| Kawasaki Ridge Crew HVAC Camo |
2025–2026 |
| Kawasaki Ridge Crew Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Crew ST HVAC |
2026 |
| Kawasaki Ridge HVAC |
2024–2026 |
| Kawasaki Ridge HVAC Camo |
2025–2026 |
| Kawasaki Ridge Limited |
2024–2025 |
| Kawasaki Ridge Limited HVAC |
2024–2025 |
| Kawasaki Ridge Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Ranch Edition |
2024–2025 |
| Kawasaki Ridge ST HVAC |
2026 |
| Kawasaki Ridge XR Crew |
2025 |
| Kawasaki Ridge XR Crew HVAC |
2025 |
| Kawasaki Ridge XR Crew Limited HVAC |
2025 |
| Kawasaki Ridge XR Deluxe HVAC |
2025 |
| Kawasaki Ridge XR HVAC |
2024–2025 |
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx4 H2 |
2026 |
| Kawasaki Teryx4 H2 Deluxe ES |
2026 |
| Kawasaki Teryx5 H2 Deluxe ES |
2026 |
Why Choose a Genuine Kawasaki OEM Ball Bearing?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM cooling part, part #92045-1246
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with Kawasaki-approved coolant
Materials and Construction
Kawasaki cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Owners Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Ball Bearing Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Kawasaki manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92045-1246 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ball Bearing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Ball Bearing?
The genuine Kawasaki part number is 92045-1246. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92045-1246 fit?
It fits 26 Kawasaki Brute Force, KFX, Ridge and Teryx models from 2007 to 2026. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Kawasaki owner's manual. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Kawasaki Ball Bearing Today
Get your Kawasaki ATV or side-by-side back to factory condition. Add the genuine Kawasaki Ball Bearing, 6901 (part #92045-1246) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.