Genuine Yamaha Ball Joint Boot Set — OEM Part #1XD-F530X-10-00
A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine Yamaha Ball Joint Boot Set restores factory strength and articulation on your Yamaha ATV or side-by-side, with the original spline count, length and joint angles.
Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles. They take constant shock loads, and wear shows up as clicking, vibration or play. This part is confirmed for 35 Yamaha models from 2014 to 2026. See the full fitment list below.
Ball Joint Boot Set at a Glance
-
OEM part number: 1XD-F530X-10-00
-
Brand: Yamaha (genuine factory part)
-
Part type: CV Boot Kit
-
Fits: Viking utility side-by-side and Wolverine recreation side-by-side models, 2014–2026
-
Condition: New
Yamaha Models and Years This Ball Joint Boot Set Fits
Genuine Yamaha part #1XD-F530X-10-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2014–2020 |
| Yamaha Viking 700 |
2014 |
| Yamaha Viking 700 EPS |
2014 |
| Yamaha Viking 700 EPS Hunte |
2014 |
| Yamaha Viking 700 EPS Hunter |
2014 |
| Yamaha Viking 700 EPS SE |
2014 |
| Yamaha Viking 700 Hunter |
2014 |
| Yamaha Viking EPS |
2014–2026 |
| Yamaha Viking EPS Hunter |
2015–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2014–2017, 2019 |
| Yamaha Viking EPS Special E |
2016, 2019 |
| Yamaha Viking Hunter |
2015–2016 |
| Yamaha Viking VI |
2015–2016 |
| Yamaha Viking VI 700 EPS |
2015 |
| Yamaha Viking VI EPS |
2015–2025 |
| Yamaha Viking VI EPS Hunter |
2015–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2016–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2019–2024 |
| Yamaha Viking VI EPS SE |
2015–2017 |
| Yamaha Viking VI EPS Special |
2017 |
| Yamaha Viking VI EPS Special Edition |
2016 |
| Yamaha Viking VI Hunter |
2015–2016 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine |
2016–2018 |
| Yamaha Wolverine EPS |
2017 |
| Yamaha Wolverine EPS Hunter |
2017 |
| Yamaha Wolverine Hunter |
2016–2017 |
| Yamaha Wolverine R |
2016–2018 |
| Yamaha Wolverine R-Spec EPS |
2016–2018 |
| Yamaha Wolverine R-Spec EPS Hunter |
2017 |
| Yamaha Wolverine R-Spec EPS SE |
2017 |
| Yamaha Wolverine R-Spec Hunter |
2016, 2018 |
Why Choose a Genuine Yamaha OEM Ball Joint Boot Set?
- Exact spline count and length for a direct fit
- Factory joint angles for full suspension travel
- Designed for the torque of the listed engines
- Sealed boots and bearings to keep out water and grit
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM axle or hub part, part #1XD-F530X-10-00
- Original spline, length and bearing dimensions
- Heat-treated shafts and joints where applicable
- Boots and seals designed for mud and water
- Fits the listed Yamaha models without modification
Materials and Construction
Yamaha axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with durable boots. Hubs and bearings use hardened races and seals made for water crossings.
Common Reasons Riders Replace This Part
- Replacing an axle with a clicking or broken joint
- Fixing torn boots before dirt ruins the joint
- Replacing worn wheel bearings and hubs
- Repairs after a hard impact
Signs Your Ball Joint Boot Set Needs Replacing
- Clicking or popping when turning under power
- Torn boots with grease slung around the wheel
- Vibration at speed or under acceleration
- Play or grinding in the wheel bearing
- A broken axle or wheel that will not drive
Installation Tips
- Raise and support the machine safely and remove the wheel.
- Remove the axle nut; replace it if it is a one-time-use nut.
- Separate the suspension as needed, keeping the boot off sharp edges.
- Install the new part, making sure the splines seat and the circlip engages.
- Torque the axle nut and suspension hardware to spec and test-ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-F530X-10-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ball Joint Boot Set with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Ball Joint Boot Set?
The genuine Yamaha part number is 1XD-F530X-10-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-F530X-10-00 fit?
It fits 35 Yamaha Viking and Wolverine models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a new axle nut?
Some Yamaha axle nuts and cotter pins are single-use. Check the parts diagram and replace them if specified.
Can I replace just the CV boot?
If the joint is quiet and the grease is clean, a boot kit can work. If dirt or water got in, replace the axle.
Is OEM as strong as a heavy-duty aftermarket axle?
It is built to Yamaha's standard for stock machines. With much larger tires or a lift, consider heavy-duty axles.
Order Your Genuine Yamaha Ball Joint Boot Set Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Ball Joint Boot Set (part #1XD-F530X-10-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.