Genuine Kawasaki Ball Joint — OEM Part #59266-0013
Bring back the factory ride and handling with a genuine Kawasaki Ball Joint. Built for the Kawasaki ATV or side-by-side, it keeps the original geometry, bushing fit and travel, so the machine tracks straight and soaks up rough ground.
A-arms, trailing arms, swingarms, shocks, springs, stabilizers, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 14 Kawasaki models from 2007 to 2025. See the full fitment list below.
Ball Joint at a Glance
-
OEM part number: 59266-0013
-
Brand: Kawasaki (genuine factory part)
-
Part type: OEM Ball Joint
-
Fits: Brute Force ATV and KFX sport and youth ATV models, 2007–2025
-
Condition: New
Kawasaki Models and Years This Ball Joint Fits
Genuine Kawasaki part #59266-0013 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 650 4x4i |
2007–2013 |
| Kawasaki Brute Force 650 4x4i Hardwoods Green HD |
2007–2010 |
| Kawasaki Brute Force 750 |
2024–2025 |
| Kawasaki Brute Force 750 4x4i |
2007–2021 |
| Kawasaki Brute Force 750 4x4i EPS |
2012–2023 |
| Kawasaki Brute Force 750 4x4i EPS Camo |
2015–2023 |
| Kawasaki Brute Force 750 4x4i Hardwoods Green HD |
2008–2009 |
| Kawasaki Brute Force 750 4x4i NRA Outdoors |
2008–2009 |
| Kawasaki Brute Force 750 4x4i Realtree APG HD |
2010 |
| Kawasaki Brute Force 750 EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS Camo |
2024–2025 |
Kawasaki KFX sport and youth ATV Fitment
| Model |
Model Years |
| Kawasaki KFX 450R |
2008–2014 |
| Kawasaki KFX 700 |
2007–2009 |
Why Choose a Genuine Kawasaki OEM Ball Joint?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as Kawasaki designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM suspension part, part #59266-0013
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road and work use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Kawasaki suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or gas damping.
Common Reasons Owners Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Ball Joint Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Kawasaki parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #59266-0013 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ball Joint with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Ball Joint?
The genuine Kawasaki part number is 59266-0013. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #59266-0013 fit?
It fits 14 Kawasaki Brute Force and KFX models from 2007 to 2025. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Kawasaki Ball Joint Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Ball Joint, OEM part #59266-0013, from Witchdoctors today and keep your Kawasaki ATV or side-by-side running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.