Genuine Yamaha Battery Band — OEM Part #2T4-82131-00-00
Skip the hardware-store guesswork. The genuine Yamaha Battery Band matches the thread pitch, length, strength grade and head style of the original, so it fits your YXZ1000 or YXZ1000R the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 16 Yamaha models from 2016 to 2025. See the full fitment list below.
Battery Band at a Glance
-
OEM part number: 2T4-82131-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Battery Box & Covers
-
Fits: YXZ pure-sport side-by-side models, 2016–2025
-
Condition: New
Yamaha Models and Years This Battery Band Fits
Genuine Yamaha part #2T4-82131-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha YXZ pure-sport side-by-side Fitment
| Model |
Model Years |
| Yamaha YXZ1000 EPS |
2016 |
| Yamaha YXZ1000 EPS SE |
2016 |
| Yamaha YXZ1000 EPS Special |
2016 |
| Yamaha YXZ1000R |
2016–2025 |
| Yamaha YXZ1000R EPS |
2017–2021 |
| Yamaha YXZ1000R EPS SE |
2017–2020 |
| Yamaha YXZ1000R EPS Special |
2017, 2020 |
| Yamaha YXZ1000R EPS SS |
2017–2021 |
| Yamaha YXZ1000R EPS SS SE |
2017–2019 |
| Yamaha YXZ1000R SE |
2016–2020 |
| Yamaha YXZ1000R SS |
2017–2025 |
| Yamaha YXZ1000R SS SE |
2017–2021 |
| Yamaha YXZ1000R SS SE Cal |
2021 |
| Yamaha YXZ1000R SS Special |
2020 |
| Yamaha YXZ1000R SS XT-R |
2020–2025 |
| Yamaha YXZ1000R SS XTR |
2020–2023 |
Why Choose a Genuine Yamaha OEM Battery Band?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM hardware, part #2T4-82131-00-00
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Yamaha assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Yamaha fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Battery Band Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Yamaha parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #2T4-82131-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Battery Band with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Battery Band?
The genuine Yamaha part number is 2T4-82131-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2T4-82131-00-00 fit?
It fits 16 Yamaha YXZ models from 2016 to 2025. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Yamaha Battery Band Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Battery Band, OEM part #2T4-82131-00-00, from Witchdoctors today and keep your YXZ1000 or YXZ1000R running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.