Genuine Yamaha Bearing — OEM Part #5KM-46102-00-00
Put power to the ground reliably with a genuine Yamaha Bearing. Built for the Yamaha ATV or side-by-side, it matches the original splines, bearings and housings, so it works with your transmission, final drives and 4WD system.
The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 40 Yamaha models from 2004 to 2013. See the full fitment list below.
Bearing at a Glance
-
OEM part number: 5KM-46102-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Gearcase Assembly
-
Fits: Grizzly utility ATV and Rhino side-by-side models, 2004–2013
-
Condition: New
Yamaha Models and Years This Bearing Fits
Genuine Yamaha part #5KM-46102-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Grizzly utility ATV Fitment
| Model |
Model Years |
| Yamaha Grizzly 660 |
2008 |
| Yamaha Grizzly 660 Hunting |
2008 |
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino |
2005 |
| Yamaha Rhino 450 |
2006–2009 |
| Yamaha Rhino 450 4WD |
2006 |
| Yamaha Rhino 450 Hunter |
2007–2009 |
| Yamaha Rhino 450 Realtree H |
2006 |
| Yamaha Rhino 450 Realtree Hd Camo |
2006 |
| Yamaha Rhino 450 SE |
2007–2008 |
| Yamaha Rhino 450 Special Edition |
2007–2008 |
| Yamaha Rhino 660 |
2004, 2007 |
| Yamaha Rhino 660 4WD |
2006 |
| Yamaha Rhino 660 4WD Explorer Edition |
2006–2007 |
| Yamaha Rhino 660 4WD Exploring |
2006–2007 |
| Yamaha Rhino 660 4WD Hunter |
2006 |
| Yamaha Rhino 660 4WD Hunter Exploring Edition |
2006 |
| Yamaha Rhino 660 4WD SE |
2006–2007 |
| Yamaha Rhino 660 4WD Special |
2006–2007 |
| Yamaha Rhino 660 4WD Sport |
2007 |
| Yamaha Rhino 660 Ducks Unlimited |
2007 |
| Yamaha Rhino 660 Hardwoods Camo Hunter Edition |
2004 |
| Yamaha Rhino 660 Hunter |
2007 |
| Yamaha Rhino 660F |
2004–2007 |
| Yamaha Rhino 700 |
2011–2013 |
| Yamaha Rhino 700 1RBD |
2013 |
| Yamaha Rhino 700 FI |
2008–2009 |
| Yamaha Rhino 700 FI Ducks |
2008–2009 |
| Yamaha Rhino 700 FI Ducks Unlimited |
2008–2009 |
| Yamaha Rhino 700 FI Hunter |
2008–2009 |
| Yamaha Rhino 700 FI SE |
2008–2009 |
| Yamaha Rhino 700 FI Special |
2008–2009 |
| Yamaha Rhino 700 FI Sport |
2008–2009 |
| Yamaha Rhino 700 Hunter |
2011–2012 |
| Yamaha Rhino 700 Hunter 1RBJ |
2013 |
| Yamaha Rhino 700 Hunter Edition |
2012 |
| Yamaha Rhino 700 Sport |
2011–2012 |
| Yamaha Rhino 700 Sport 1R |
2013 |
| Yamaha Rhino 700FI |
2009 |
| Yamaha Rhino Hardwoods Camo |
2004 |
| Yamaha Rhino Hunter |
2005 |
Why Choose a Genuine Yamaha OEM Bearing?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM drivetrain part, part #5KM-46102-00-00
- Machined to Yamaha's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Yamaha models
Materials and Construction
Yamaha drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions and front or rear final drives
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Bearing Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or final drives
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain transmission or final-drive oil before disassembly.
- Follow the Yamaha service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified oil during assembly.
- Refill with the correct oil and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bearing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Bearing?
The genuine Yamaha part number is 5KM-46102-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #5KM-46102-00-00 fit?
It fits 40 Yamaha Grizzly and Rhino models from 2004 to 2013. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
What oil should I use?
Use the transmission and final-drive oils in your Yamaha owner's manual. The wrong oil can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the oil and damage gears and bearings. Repair problems early.
Order Your Genuine Yamaha Bearing Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Bearing, OEM part #5KM-46102-00-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.