Genuine Polaris Dash Gauge Bezel — OEM Part #5438945
Restore reliable power and electronics with a genuine Polaris Dash Gauge Bezel. Built for the Polaris ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 218 Polaris models from 2011 to 2025. See the full fitment list below.
Dash Gauge Bezel at a Glance
-
OEM part number: 5438945
-
Brand: Polaris (genuine factory part)
-
Part type: Dash Bezel
-
Fits: ACE single-seat, Farmhand utility vehicle, Hawkeye ATV, other Polaris, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2011–2025
-
Condition: New
Polaris Models and Years This Dash Gauge Bezel Fits
Genuine Polaris part #5438945 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 218 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 325 |
2016 |
1 |
| Polaris ACE 570 |
2016–2018 |
4 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye 325 |
2015 |
1 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2011–2013 |
3 |
| Polaris RZR 570 |
2012–2020 |
6 |
| Polaris RZR 800 |
2011–2012, 2014 |
4 |
| Polaris RZR 900 |
2014–2020 |
14 |
| Polaris RZR 1000 |
2018–2019, 2021 |
3 |
| Polaris RZR S |
2012–2014, 2017–2020 |
11 |
| Polaris RZR S4 |
2020–2021 |
1 |
| Polaris RZR Trail |
2020–2022 |
4 |
| Polaris RZR XP |
2011–2013, 2017–2018 |
6 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015 |
1 |
| Polaris Ranger 4x4 |
2011 |
2 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 6x6 |
2011–2013, 2015 |
3 |
| Polaris Ranger 500 |
2017–2022 |
8 |
| Polaris Ranger 570 |
2014–2025 |
29 |
| Polaris Ranger 800 |
2011–2017 |
11 |
| Polaris Ranger 900 |
2011–2019 |
9 |
| Polaris Ranger 1000 |
2015–2018 |
6 |
| Polaris Ranger Diesel |
2011–2018 |
7 |
| Polaris Ranger ETX |
2015–2016 |
1 |
| Polaris Ranger Hst |
2015–2017 |
1 |
| Polaris Ranger MD |
2018 |
1 |
| Polaris Ranger XP |
2012–2019 |
21 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
5 |
| Polaris Sportsman 450 |
2016–2017 |
2 |
| Polaris Sportsman 570 |
2015–2018 |
23 |
| Polaris Sportsman 850 |
2015–2016 |
3 |
| Polaris Sportsman 1000 |
2015–2016 |
2 |
| Polaris Sportsman ACE |
2014–2015 |
8 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Touring |
2015–2017 |
9 |
| Polaris Sportsman XP |
2015–2016 |
2 |
Why Choose a Genuine Polaris OEM Dash Gauge Bezel?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #5438945
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Dash Gauge Bezel Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5438945 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dash Gauge Bezel with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Dash Gauge Bezel?
The genuine Polaris part number is 5438945. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5438945 fit?
It fits 218 Polaris ACE, Farmhand, Hawkeye, RZR, Ranger and Sportsman models from 2011 to 2025. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Dash Gauge Bezel Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Dash Gauge Bezel, OEM part #5438945, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.