Genuine Indian Billet Shift Rod Aluminum — OEM Part #2881994-472
Two-up touring and loaded bags demand a healthy rear end. The genuine Indian Billet Shift Rod Aluminum (part #2881994-472) restores factory support on the Indian Scout and Scout Sixty.
The swingarm and rear shock carry you, your passenger and your luggage. Worn parts cause a harsh ride, bottoming and vague handling. This part is confirmed for 2 Indian models from 2015 to 2022. See the full fitment list below.
Availability note: This part is listed as discontinued or no longer available, and stock may be limited. See what to do when a part is no longer available or contact us for help finding a replacement.
Indian Billet Shift Rod Aluminum at a Glance
-
OEM part number: 2881994-472
-
Brand: Indian Motorcycle (genuine OEM part)
-
Part type: Shift Linkage
-
Fits: Indian Scout models, 2015–2022
-
Condition: New
Indian Models and Years This Billet Shift Rod Aluminum Fits
Genuine Indian part #2881994-472 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.
Indian Scout Fitment
| Model |
Model Years |
| Indian Scout |
2015–2022 |
| Indian Scout Sixty |
2016–2022 |
Why Choose a Genuine Indian OEM Billet Shift Rod Aluminum?
- Factory ride height and spring support
- Correct alignment for the final drive
- Stable handling with a passenger and luggage
- Smooth ride over rough pavement
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing
Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.
Features and Materials
Key Features
- Genuine Indian Motorcycle OEM part #2881994-472
- Factory pivot and mounting dimensions
- Corrosion-resistant finish
- Direct replacement for the listed models
Materials and Construction
Indian swingarms are steel or cast aluminum with steel pivot shafts and bearings. Shocks use steel bodies, coil springs or air chambers, and sealed damping.
Common Reasons Riders Replace This Part
- Shock replacement on high-mileage bikes
- Swingarm bearing and bushing service
- Restoring air shock function on touring models
- Repairs after a crash or impact
Signs Your Billet Shift Rod Aluminum Needs Replacing
- Harsh ride or frequent bottoming
- Oil leaking from the shock
- Rear end feels loose or wanders
- Clunks over bumps
Installation Tips
- Support the bike securely under the frame.
- Remove the exhaust, bags or covers as needed for access.
- Install the new part and lubricate pivots where specified.
- Torque pivot and shock bolts to spec.
- Set preload or air pressure, check alignment and test-ride.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Indian Parts Diagrams for This Part
Find part #2881994-472 in the factory Indian parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Indian OEM Parts
Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Billet Shift Rod Aluminum with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Billet Shift Rod Aluminum?
The genuine Indian Motorcycle part number is 2881994-472. Use it to match this part to your factory parts diagram.
Which Indian models does part #2881994-472 fit?
It fits the Indian Scout (2015–2022); Indian Scout Sixty (2016–2022).
Is this a genuine Indian Motorcycle part?
Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.
How do I make sure this fits my bike?
Match part #2881994-472 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.
How do I set my air shock pressure?
Use the chart in your owner's manual for your load and a low-volume shock pump.
Should I replace swingarm bearings too?
If they are worn or notchy, yes. Inspect them whenever the swingarm is removed.
Will this change my ride height?
No. OEM parts return the bike to factory ride height.
Order Your Genuine Indian Billet Shift Rod Aluminum Today
Ride with confidence on parts made for your bike. Order the genuine Indian Billet Shift Rod Aluminum, OEM part #2881994-472, from Witchdoctors today and keep your Indian Scout and Scout Sixty running the way Indian designed it.
Where to Ride Your Indian
Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.