Genuine Can-Am Rear Bumper, Blue — OEM Part #705009740
Rocks, stumps and ledges take a toll on the underside and front end of any machine. The genuine Can-Am Rear Bumper, Blue restores factory protection on your Renegade, bolting to the original mounting points so it takes hits the way BRP engineered it to.
Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 1 Can-Am model from 2016 to 2017. See the full fitment list below.
Rear Bumper, Blue at a Glance
-
OEM part number: 705009740
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Rear Bumper
-
Color: Blue
-
Note: Package XMR
-
Fits: Renegade sport ATV models, 2016–2017
-
Condition: New
Can-Am Models and Years This Rear Bumper Fits
Genuine Can-Am part #705009740 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Renegade sport ATV Fitment
| Model |
Model Years |
| Can-Am Renegade |
2016–2017 |
Why Choose a Genuine Can-Am OEM Rear Bumper?
- Bolts to factory mounting points, with no drilling
- Shields expensive parts from rocks, stumps and debris
- Works with the factory frame and ground clearance
- Costs far less than repairing the parts it protects
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM protection part, part #705009740
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built for repeated trail impacts
Materials and Construction
Can-Am protection parts are typically steel tube, stamped steel, aluminum or high-density polyethylene (HDPE), depending on location, finished to resist corrosion from mud, water and road salt.
Common Reasons Riders Replace This Part
- Rock crawling and technical trails
- Farm and ranch work around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate
- Restoring factory protection on a used machine
Signs Your Rear Bumper Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Deep gouges that weaken the part
- Rust-through on steel parts
- Damage to the components behind the guard
Installation Tips
- Support the machine safely on stands if working underneath.
- Use the Can-Am parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install with fresh hardware where needed and thread locker if the manual calls for it.
- Torque to spec and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #705009740 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Bumper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Rear Bumper?
The genuine Can-Am part number is 705009740. Use it to match this part to your factory parts diagram. Note: package xmr.
Which Can-Am models does part #705009740 fit?
It fits the Renegade (2016–2017).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Is this as strong as aftermarket armor?
It is built to BRP's factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.
Can I mount a winch with this part?
Only if the Can-Am parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.
Order Your Genuine Can-Am Rear Bumper Today
Get your Renegade back to factory condition. Add the genuine Can-Am Rear Bumper, Blue (part #705009740) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.