Genuine Kawasaki Bolt 6X85 — OEM Part #92154-Y114
Skip the hardware-store guesswork. The genuine Kawasaki Bolt 6X85 matches the thread pitch, length, strength grade and head style of the original, so it fits your Kawasaki ATV or side-by-side the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 11 Kawasaki models from 2016 to 2026. See the full fitment list below.
Bolt 6X85 at a Glance
-
OEM part number: 92154-Y114
-
Brand: Kawasaki (genuine factory part)
-
Part type: OEM Screw
-
Fits: Brute Force ATV, KFX sport and youth ATV and Mule utility side-by-side models, 2016–2026
-
Condition: New
Kawasaki Models and Years This Bolt 6X85 Fits
Genuine Kawasaki part #92154-Y114 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 300 |
2017–2018, 2020–2024, 2026 |
| Kawasaki Brute Force 450 |
2025–2026 |
| Kawasaki Brute Force 450 4x4 |
2025–2026 |
Kawasaki KFX sport and youth ATV Fitment
| Model |
Model Years |
| Kawasaki KFX 50 |
2016–2017, 2019–2026 |
| Kawasaki KFX 90 |
2016–2017, 2019–2026 |
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule PRO-MX |
2019, 2021–2026 |
| Kawasaki Mule PRO-MX EPS |
2019–2026 |
| Kawasaki Mule PRO-MX EPS Camo |
2019–2026 |
| Kawasaki Mule PRO-MX EPS LE |
2019–2026 |
| Kawasaki Mule PRO-MX LE |
2024–2026 |
| Kawasaki Mule PRO-MX SE |
2022–2026 |
Why Choose a Genuine Kawasaki OEM Bolt 6X85?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM hardware, part #92154-Y114
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Kawasaki assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Kawasaki fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Owners Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Bolt 6X85 Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Kawasaki parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92154-Y114 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bolt 6X85 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Bolt 6X85?
The genuine Kawasaki part number is 92154-Y114. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92154-Y114 fit?
It fits 11 Kawasaki Brute Force, KFX and Mule models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Kawasaki Bolt 6X85 Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Bolt 6X85, OEM part #92154-Y114, from Witchdoctors today and keep your Kawasaki ATV or side-by-side running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.