Genuine CFMoto Bolt, M6X22 — OEM Part #0GRV-012102-1100
Small parts hold big things together. The genuine CFMoto Bolt, M6X22 is the exact factory fastener specified for your CForce 600, with the correct size, thread, length, grade and finish, so it fits right and holds torque the way CFMoto engineered it.
OEM hardware is engineered for a specific location and load. Using the wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 2 CFMoto models from 2024 to 2025. See the full fitment list below.
Bolt, M6X22 at a Glance
-
OEM part number: 0GRV-012102-1100
-
Brand: CFMOTO (genuine factory part)
-
Part type: CVT/Clutch Components
-
Fits: CForce ATV models, 2024–2025
-
Condition: New
CFMoto Models and Years This Bolt, M6X22 Fits
Genuine CFMoto part #0GRV-012102-1100 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 600 |
2024–2025 |
| CFMoto CForce 600 Touring |
2024–2025 |
Why Choose a Genuine CFMoto OEM Bolt, M6X22?
- Exact factory size, thread pitch and length
- Correct strength grade for the location it is used in
- Factory corrosion-resistant finish
- No guessing at the hardware store or mixing metric sizes
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM hardware, part #0GRV-012102-1100
- Matches the original thread, length, head style and grade
- Zinc-plated or coated finish to resist corrosion (where applicable)
- Used across multiple CFMoto assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
CFMoto fasteners are made from heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, and finished with zinc or similar plating. Washers, clips and bushings are made from steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping a spare supply for common repairs
Signs Your Bolt, M6X22 Needs Replacing
- Rounded heads or damaged threads
- Rust or corrosion that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that have already been reused
Installation Tips
- Check the CFMoto parts diagram to confirm the location and quantity you need.
- Clean the threads in the mating part, and chase damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0GRV-012102-1100 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Bolt, M6X22 and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bolt, M6X22 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Bolt, M6X22?
The genuine CFMoto part number is 0GRV-012102-1100. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0GRV-012102-1100 fit?
It fits the CForce 600 (2024–2025); CForce 600 Touring (2024–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, thread pitch, length and finish often differ. For anything structural, such as suspension, brakes or engine parts, use the OEM fastener specified for that location.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity used at each location, and order enough to replace them all.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use. Replace them whenever they are removed.
Order Your Genuine CFMoto Bolt, M6X22 Today
Get your CForce 600 back to factory condition. Add the genuine CFMoto Bolt, M6X22 (part #0GRV-012102-1100) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.