Badge

CVT Cover Seal Ring 0GR0-013003 by CFMOTO

Price
$17.99 USD
Normally Ships in 10-14 Business Days

Inventory:

Loading..
SKU: 0GR0-013003
In stock and ready for shipping

SKU: 0GR0-013003

Genuine CFMoto CVT Cover Seal Ring — OEM Part #0GR0-013003

Your CVT turns engine power into ground speed, and it depends on precise parts working together. The genuine CFMoto CVT Cover Seal Ring restores factory clutch performance on your CFMoto ATV or UTV, built to the weights, angles and tolerances CFMoto calibrated for smooth engagement and strong backshift.

The primary and secondary clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 7 CFMoto models from 2015 to 2025. See the full fitment list below.

CVT Cover Seal Ring at a Glance

  • OEM part number: 0GR0-013003
  • Brand: CFMOTO (genuine factory part)
  • Part type: Clutch Covers & Gaskets
  • Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2015–2025
  • Condition: New

CFMoto Models and Years This CVT Cover Seal Ring Fits

Genuine CFMoto part #0GR0-013003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Model Model Years
CFMoto CForce 400 2016–2022
CFMoto CForce 500 HO 2015–2018
CFMoto CForce 500 S 2017–2022
CFMoto CForce 600 2019–2025
CFMoto CForce 600 Touring 2020–2025

CFMoto UForce utility UTV Fitment

Model Model Years
CFMoto UForce 500 2016–2020

CFMoto ZForce sport UTV Fitment

Model Model Years
CFMoto ZForce 500 2016–2022

Why Choose a Genuine CFMoto OEM CVT Cover Seal Ring?

  • Factory calibration for engagement, shift-out and backshift
  • Correct belt alignment and deflection
  • Keeps CVT cooling and sealing at factory standard
  • Helps your drive belt last longer
  • Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

  • Genuine CFMoto OEM CVT part, part #0GR0-013003
  • Built to CFMoto's original clutch specifications
  • Precision-machined surfaces where applicable
  • Designed for the listed CFMoto CVT systems
  • Works with OEM belts, covers, seals and ducts

Materials and Construction

CFMoto CVT parts use precision-cast or machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts. Seals and gaskets keep water and dust out of the belt case.

Common Reasons Riders Replace This Part

  • Fixing belt slip, jerky engagement or poor top speed
  • Replacing worn sheaves, rollers, springs or bushings
  • Repairing covers, seals and ducts after water intrusion
  • Routine CVT service and belt replacement

Signs Your CVT Cover Seal Ring Needs Replacing

  • Belt slipping, squealing or burning smell
  • Jerky, harsh or delayed engagement
  • Loss of top speed or poor acceleration
  • Glazed belt or frequent belt failures
  • Water or debris inside the CVT cover

Installation Tips

  1. Remove the CVT cover and clean out belt dust before taking anything apart.
  2. Use the correct CFMoto clutch tools. Primary and secondary clutches are under spring tension.
  3. Inspect sheave faces, rollers, bushings and the belt for wear while you are in there.
  4. Assemble to the factory torque specs and check belt deflection and alignment.
  5. Replace cover seals and gaskets, then follow the belt break-in procedure.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #0GR0-013003 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the CVT Cover Seal Ring and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your CVT Cover Seal Ring with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this CFMoto CVT Cover Seal Ring?

The genuine CFMoto part number is 0GR0-013003. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #0GR0-013003 fit?

It fits 7 CFMoto CForce, UForce and ZForce models from 2015 to 2025. The complete list is in the fitment tables above.

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Should I replace the belt at the same time?

If the belt is glazed, cracked or worn to the minimum width, replace it with the clutch parts so you start fresh.

What causes CVT belts to burn up?

The usual causes are riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.

Do I need special tools?

Yes. Most CFMoto clutches need a clutch holder and puller to disassemble safely. Using the wrong tools can damage parts.

Order Your Genuine CFMoto CVT Cover Seal Ring Today

Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto CVT Cover Seal Ring (part #0GR0-013003) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: