Genuine Can-Am Rear Drum Bolt — OEM Part #A4353013100A
Small parts hold big things together. The genuine Can-Am Rear Drum Bolt is the exact factory fastener specified for your Renegade models, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 7 Can-Am models from 2023 to 2026. See the full fitment list below.
Rear Drum Bolt at a Glance
-
OEM part number: A4353013100A
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Brake Drums & Components
-
Fits: Renegade sport ATV models, 2023–2026
-
Condition: New
Can-Am Models and Years This Rear Drum Bolt Fits
Genuine Can-Am part #A4353013100A fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Renegade sport ATV Fitment
| Model |
Model Years |
| Can-Am Renegade 70 EFI Carb |
2023–2026 |
| Can-Am Renegade 70 EFI Epa |
2023 |
| Can-Am Renegade 110 EFI (International) |
2024–2026 |
| Can-Am Renegade 110 EFI Carb |
2023–2026 |
| Can-Am Renegade 110 EFI Epa |
2023 |
| Can-Am Renegade 110 EFI X xc |
2023–2026 |
| Can-Am Renegade X xc 110 EFI (International) |
2023–2026 |
Why Choose a Genuine Can-Am OEM Rear Drum Bolt?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM hardware, part #A4353013100A
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Can-Am assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Can-Am fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Rear Drum Bolt Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Can-Am parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #A4353013100A and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Drum Bolt with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Rear Drum Bolt?
The genuine Can-Am part number is A4353013100A. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #A4353013100A fit?
It fits 7 Can-Am Renegade models from 2023 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Can-Am Rear Drum Bolt Today
Get your Renegade models back to factory condition. Add the genuine Can-Am Rear Drum Bolt (part #A4353013100A) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.