Genuine Polaris Box Mount Weldment — OEM Part #1023962
Keep the cab on your RZR PRO or RZR Turbo tight, quiet and weather-resistant with a genuine Polaris Box Mount Weldment. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 34 Polaris models from 2020 to 2024. See the full fitment list below.
Box Mount Weldment at a Glance
-
OEM part number: 1023962
-
Brand: Polaris (genuine factory part)
-
Part type: Cab Frame
-
Fits: RZR sport side-by-side models, 2020–2024
-
Condition: New
Polaris Models and Years This Box Mount Weldment Fits
Genuine Polaris part #1023962 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR PRO |
2023 |
| Polaris RZR PRO XP |
2020 |
| Polaris RZR PRO XP 4 |
2020 |
| Polaris RZR PRO XP 4 Premium |
2021–2022 |
| Polaris RZR PRO XP 4 Premium Ca |
2021 |
| Polaris RZR PRO XP 4 Premium Evap |
2022 |
| Polaris RZR PRO XP 4 Sport |
2021–2022 |
| Polaris RZR PRO XP 4 Sport Ca |
2021 |
| Polaris RZR PRO XP 4 Sport Evap |
2022 |
| Polaris RZR PRO XP 4 Sport Rockford Fosgate LE |
2021 |
| Polaris RZR PRO XP 4 Sport Rockford LE |
2021 |
| Polaris RZR PRO XP 4 Ultimate |
2021–2023 |
| Polaris RZR PRO XP 4 Ultimate Rockford Fosgate LE |
2021–2022 |
| Polaris RZR PRO XP Premium |
2021–2022 |
| Polaris RZR PRO XP Premium Ca |
2021 |
| Polaris RZR PRO XP Premium Evap |
2022 |
| Polaris RZR PRO XP Sport |
2021–2023 |
| Polaris RZR PRO XP Sport Ca |
2021 |
| Polaris RZR PRO XP Sport Evap |
2022 |
| Polaris RZR PRO XP Sport Rockford Fosgate LE |
2021 |
| Polaris RZR PRO XP Sport Rockford LE |
2021 |
| Polaris RZR PRO XP Ultimate |
2021–2023 |
| Polaris RZR PRO XP Ultimate Ca |
2021 |
| Polaris RZR PRO XP Ultimate Evap |
2021–2022 |
| Polaris RZR PRO XP Ultimate Rockford Fosgate LE |
2021–2022 |
| Polaris RZR PRO XP Ultimate Rockford Fosgate Limited Edition |
2022 |
| Polaris RZR PRO XP Ultimate Rockford LE |
2021 |
| Polaris RZR PRO Xp4 Ultimate Rockford LE |
2021 |
| Polaris RZR Turbo |
2023 |
| Polaris RZR Turbo PRO XP LT |
2020 |
| Polaris RZR Turbo R 4 Sport |
2022 |
| Polaris RZR Turbo R 4 Ultimate |
2022 |
| Polaris RZR Turbo R Sport |
2022, 2024 |
| Polaris RZR Turbo R Ultimate |
2022–2024 |
Why Choose a Genuine Polaris OEM Box Mount Weldment?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #1023962
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Box Mount Weldment Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1023962 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Box Mount Weldment with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Box Mount Weldment?
The genuine Polaris part number is 1023962. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1023962 fit?
It fits 34 Polaris RZR models from 2020 to 2024. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Box Mount Weldment Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Box Mount Weldment, OEM part #1023962, from Witchdoctors today and keep your RZR PRO or RZR Turbo running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
-
Windrock Park — Oliver Springs, Tennessee: 300+ miles of mountain trails