Genuine Polaris Cargo Box Panel Rear, Right, Voodoo Blue — OEM Part #0454284-619
Your machine earns its keep hauling gear, feed, firewood and tools. The genuine Polaris Cargo Box Panel Rear, Right, Voodoo Blue restores factory cargo and storage function on your RZR 170, fitting the original mounts so loads stay secure and latches work the way they should.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 1 Polaris model from 2014 to 2017. See the full fitment list below.
Cargo Box Panel Rear, Right, Voodoo Blue at a Glance
-
OEM part number: 0454284-619
-
Brand: Polaris (genuine factory part)
-
Part type: Cargo / Dump Box Panel
-
Position: Rear, Right
-
Color: Voodoo Blue
-
Fits: RZR sport side-by-side models, 2014–2017
-
Condition: New
Polaris Models and Years This Cargo Box Panel Rear Fits
Genuine Polaris part #0454284-619 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR 170 |
2014–2017 |
Why Choose a Genuine Polaris OEM Cargo Box Panel Rear?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #0454284-619
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and Lock & Ride accessories where equipped
Materials and Construction
Polaris cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Cargo Box Panel Rear Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Polaris parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #0454284-619 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cargo Box Panel Rear with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Cargo Box Panel Rear?
The genuine Polaris part number is 0454284-619. Use it to match this part to your factory parts diagram.
Which Polaris models does part #0454284-619 fit?
It fits the RZR 170 (2014–2017).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by the manufacturer for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Polaris setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Polaris Cargo Box Panel Rear Today
Get your RZR 170 back to factory condition. Add the genuine Polaris Cargo Box Panel Rear, Right, Voodoo Blue (part #0454284-619) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.