Genuine Yamaha Bracket — OEM Part #2P5-15199-00-00
When you are inside the engine, there is no room for guesswork. The genuine Yamaha Bracket is built to the exact tolerances of the original part in your Rhino models, so it fits the mating parts correctly and keeps the engine running the way Yamaha designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 22 Yamaha models from 2006 to 2013. See the full fitment list below.
Bracket at a Glance
-
OEM part number: 2P5-15199-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Crankcase & Components
-
Fits: Rhino side-by-side models, 2006–2013
-
Condition: New
Yamaha Models and Years This Bracket Fits
Genuine Yamaha part #2P5-15199-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino 450 |
2006–2009 |
| Yamaha Rhino 450 4WD |
2006 |
| Yamaha Rhino 450 Hunter |
2007–2009 |
| Yamaha Rhino 450 Realtree H |
2006 |
| Yamaha Rhino 450 Realtree Hd Camo |
2006 |
| Yamaha Rhino 450 SE |
2007–2008 |
| Yamaha Rhino 450 Special Edition |
2007–2008 |
| Yamaha Rhino 700 |
2011–2013 |
| Yamaha Rhino 700 1RBD |
2013 |
| Yamaha Rhino 700 FI |
2008–2009 |
| Yamaha Rhino 700 FI Ducks |
2008–2009 |
| Yamaha Rhino 700 FI Ducks Unlimited |
2008–2009 |
| Yamaha Rhino 700 FI Hunter |
2008–2009 |
| Yamaha Rhino 700 FI SE |
2008–2009 |
| Yamaha Rhino 700 FI Special |
2008–2009 |
| Yamaha Rhino 700 FI Sport |
2008–2009 |
| Yamaha Rhino 700 Hunter |
2011–2012 |
| Yamaha Rhino 700 Hunter 1RBJ |
2013 |
| Yamaha Rhino 700 Hunter Edition |
2012 |
| Yamaha Rhino 700 Sport |
2011–2012 |
| Yamaha Rhino 700 Sport 1R |
2013 |
| Yamaha Rhino 700FI |
2009 |
Why Choose a Genuine Yamaha OEM Bracket?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable Yamaha warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM engine part, part #2P5-15199-00-00
- Machined to Yamaha's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Yamaha engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Bracket Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug
Installation Tips
- Follow the Yamaha service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Bracket?
The genuine Yamaha part number is 2P5-15199-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2P5-15199-00-00 fit?
It fits 22 Yamaha Rhino models from 2006 to 2013. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Yamaha parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Yamaha Bracket Today
Get your Rhino models back to factory condition. Add the genuine Yamaha Bracket (part #2P5-15199-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.