Genuine Victory Ignition Coil Bracket — OEM Part #5250414
Saddlebags and trunks carry everything on a long ride, and a broken lid, latch or bin turns a trip into a hassle. The genuine Victory Ignition Coil Bracket restores the factory fit and weather sealing on your Victory motorcycle.
Saddlebags, trunks, lids, bins, latches and mounts have to hold gear securely at highway speed and keep out rain and road spray. This part is confirmed for 9 Victory models from 2008 to 2013.
Ignition Coil Bracket at a Glance
-
OEM part number: 5250414
-
Brand: Victory (genuine Polaris-made OEM part)
-
Part type: Ignition Bracket
-
Victory fitment: Cross Country, Cross Roads, Hammer, Highball, Jackpot, Kingpin, Vegas and Vision, 2008–2013
-
Condition: New
Models and Years This Ignition Coil Bracket Fits
Genuine part #5250414 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Cross Country |
2010–2012 |
| Victory Cross Roads |
2010–2012 |
| Victory Hammer |
2008–2012 |
| Victory Highball |
2013 |
| Victory Jackpot |
2008–2012 |
| Victory Kingpin |
2008–2011 |
| Victory Vegas |
2008–2012 |
| Victory Vision |
2008–2009, 2011–2012 |
| Victory Vision Tour |
2009–2010 |
Why Choose a Genuine Victory OEM Ignition Coil Bracket?
- Factory fit with the original bags, lids and mounts
- Restores latching, locking and sealing
- Painted or finished to match where applicable
- Keeps touring capacity intact
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory OEM luggage part, part #5250414
- Original hinge, latch and mounting points
- Weather seals and gaskets where applicable
- Designed for the listed Victory models
- Works with factory locks and keys where equipped
Materials and Construction
Victory bags and trunks use impact-resistant painted plastics or composite shells, steel and aluminum mounts, and rubber seals for weather protection.
Common Reasons Riders Replace This Part
- Replacing a cracked lid or bin after a tip-over
- Fixing lids that will not latch or lock
- Stopping water leaks into the bags
- Restoring touring bags on a used bike
Signs Your Ignition Coil Bracket Needs Replacing
- Lids that pop open or will not latch
- Water inside the bags after rain
- Cracked bins, lids or mounts
- Broken hinges or latch mechanisms
- Torn or flattened seals
Installation Tips
- Empty the bag and remove it from the bike if needed.
- Use the Victory parts diagram to identify hinge, latch and mount hardware.
- Transfer locks, seals and reflectors you plan to reuse.
- Install and adjust the latch so the lid closes firmly and seals.
- Check the mounts are tight before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5250414 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ignition Coil Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Ignition Coil Bracket?
The genuine part number is 5250414. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #5250414 fit?
It fits 9 Victory models (Cross Country, Cross Roads, Hammer, Highball, Jackpot, Kingpin, Vegas and Vision) from 2008 to 2013. See the Victory fitment table above.
Does part #5250414 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.
Will a lid fit my existing bin?
Lids and bins are model-specific. Check the fitment table and match the part number to your diagram.
Does this include the lock?
Only if the title says so. Locks and keys are usually separate parts.
How do I stop water getting in?
Replace worn seals and make sure the latch pulls the lid down evenly.
Order Your Genuine Victory Ignition Coil Bracket Today
Keep your Victory motorcycle on the road. Add the genuine Victory Ignition Coil Bracket (part #5250414) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.