Genuine Victory License Plate Bracket Mount — OEM Part #5251952
Keep your Victory motorcycle solid and straight with a genuine Victory License Plate Bracket Mount. It is made to Victory's original dimensions, so engine, suspension and bodywork bolt back on in alignment.
Frames, engine cradles, mounts, kickstands and footrest mounts carry the engine and rider loads. A bent or cracked part affects handling and safety. This part is confirmed for 7 Victory models from 2010 to 2017.
License Plate Bracket Mount at a Glance
-
OEM part number: 5251952
-
Brand: Victory (genuine Polaris-made OEM part)
-
Part type: License Plate Mount
-
Victory fitment: Cross Country, Cross Roads, Hardball, Magnum and X1, 2010–2017
-
Condition: New
Models and Years This License Plate Bracket Mount Fits
Genuine part #5251952 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Cross Country |
2010–2017 |
| Victory Cross Country Tour |
2013–2017 |
| Victory Cross Roads |
2010–2014 |
| Victory Cross Roads Classic |
2013–2014 |
| Victory Hardball |
2013 |
| Victory Magnum |
2015–2017 |
| Victory X1 |
2015–2017 |
Why Choose a Genuine Victory OEM License Plate Bracket Mount?
- Factory geometry and alignment
- Original mounting points for engine and bodywork
- Correct isolators and bushings to control vibration
- Restores safe, stable handling
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory OEM frame or mount part, part #5251952
- Original dimensions and hardware locations
- Corrosion-resistant finish
- Designed for the listed Victory models
- Works with factory isolators and fasteners
Materials and Construction
Victory frames and mounts use welded steel or cast aluminum with powder-coat or e-coat finishes, plus rubber isolators where vibration control matters.
Common Reasons Riders Replace This Part
- Repairs after a crash or tip-over
- Replacing a bent kickstand or mount
- Replacing worn engine mounts or isolators
- Restoring a bike with frame damage
Signs Your License Plate Bracket Mount Needs Replacing
- Bent kickstand or bike leaning too far
- Excess vibration from worn mounts
- Cracks or bends after an impact
- Misaligned bodywork or wheels
- Loose or missing mounting hardware
Installation Tips
- Support the bike and engine safely before removing mounts.
- Follow the Victory service manual for torque specs and sequence.
- Replace isolators and hardware as specified.
- Check alignment of wheels and bodywork after installation.
- Recheck torque after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5251952 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your License Plate Bracket Mount with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory License Plate Bracket Mount?
The genuine part number is 5251952. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #5251952 fit?
It fits 7 Victory models (Cross Country, Cross Roads, Hardball, Magnum and X1) from 2010 to 2017. See the Victory fitment table above.
Does part #5251952 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.
Is my kickstand bent?
If the bike leans much farther than usual, it may be. Our blog has a diagnostic guide.
Can a bent frame be straightened?
Frame repair needs a specialist and a frame jig. Replacing damaged parts is safer.
Do I need new hardware?
Replace any fastener that was stretched, corroded or specified as one-time-use.
Order Your Genuine Victory License Plate Bracket Mount Today
Victory parts get harder to find every year. Order the genuine Victory License Plate Bracket Mount, OEM part #5251952, from Witchdoctors today and keep your Victory motorcycle running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.