Victory License Plate Bracket, Right Hand 5249845

Genuine Victory Fork Oil Seal, 50mm — OEM Part #3610077

A smooth front end makes every mile better. The genuine Victory Fork Oil Seal, 50mm (part #3610077) brings the Victory V92SC SportCruiser back to factory steering and damping.

Forks and triple trees handle steering, braking loads and bumps. Worn seals, springs or bearings cause leaks, wobble and poor handling. This part is confirmed for 1 Victory model from 2000 to 2001. See the full fitment list below.

Victory Fork Oil Seal, 50mm at a Glance

• OEM part number: 3610077
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: Fork Seals & Bushings
• Fits: Victory V92 Classic models, 2000–2001
• Condition: New

Victory Models and Years This Fork Oil Seal, 50mm Fits

Genuine Victory part #3610077 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory V92 Classic Fitment

Why Choose a Genuine Victory OEM Fork Oil Seal, 50mm?

• Factory spring rate and damping
• Correct steering geometry and trail
• Leak-free seals and smooth action
• Stable handling under braking
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #3610077
• Precision-machined to original dimensions
• Matching chrome or black finish
• Direct replacement for the listed models

Materials and Construction

Victory front suspension parts use hard-chromed steel fork tubes, cast aluminum sliders and triple clamps, steel springs, and oil-resistant seals and bushings.

Common Reasons Riders Replace This Part

• Fork seal and bushing service
• Replacing bent tubes or damaged legs
• Steering bearing replacement
• Repairs after a front-end impact

Signs Your Fork Oil Seal, 50mm Needs Replacing

• Oil on the fork tubes or brake
• Clunking under braking
• Front end feels soft or bouncy
• Head shake or notchy steering

Installation Tips

1. Support the bike securely with the front wheel off the ground.
2. Remove the wheel, fender and brake calipers as needed.
3. Install new parts and fill forks with the correct oil and level.
4. Torque triple clamp and axle pinch bolts to spec.
5. Pump the forks, check alignment and test-ride carefully.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #3610077 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2001 Victory V92SC SportCruiser parts diagrams
• 2000 Victory V92SC SportCruiser parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory Upper Fork Bushing (#3585715)
• Victory Fork O-Ring, 50mm (#5411874)
• Victory Fork/Fender Spacer (#5411777)
• Victory Bushing (#7556120)
• Victory Fork O-Ring (#5411330)
• Victory Fork Oil Seal (#3610068)

Recommended Accessories and Maintenance Supplies

Pair your Fork Oil Seal, 50mm with these parts and supplies:

• Victory maintenance essentials — Filters, plugs, fluids and wear items
• Galfer brakes for Victory — Brake pads, rotors and braided lines
• Dunlop tires for Victory — Front and rear touring and cruiser tires
• Hard-to-find Victory parts — Obsolete and discontinued Victory parts
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Choosing The Correct Fork Oil For Your Victory or Indian Motorcycle
• How to Prepare Your Motorcycle for Winter Storage.
• Can You Ride a Motorcycle in The Rain?
• Beware of Victory & Indian Motorcycle Parts Scams on Facebook!

Frequently Asked Questions

What is the OEM part number for this Victory Fork Oil Seal, 50mm?

The genuine Polaris/Victory part number is 3610077. Use it to match this part to your factory parts diagram.

Which Victory models does part #3610077 fit?

It fits the V92SC SportCruiser (2000–2001).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

What fork oil does my Victory need?

See our fork oil guide and your service manual for the correct weight and level.

Should I replace seals on both forks?

Yes. Service both legs together for even damping.

Can bent fork tubes be straightened?

Replacement is the safer choice for a road motorcycle.

Order Your Genuine Victory Fork Oil Seal, 50mm Today

Ride with confidence on parts made for your bike. Order the genuine Victory Fork Oil Seal, 50mm, OEM part #3610077, from Witchdoctors today and keep your Victory V92SC SportCruiser running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• M-119 Tunnel of Trees — Harbor Springs, Michigan: a narrow, wooded Lake Michigan shoreline road
• Chief Joseph Scenic Byway (WY-296) — northwest Wyoming: switchbacks over Dead Indian Pass toward Yellowstone