Genuine Polaris Rear Brake Cable — OEM Part #0453878
Keep the cab on your Outlaw 50 or Predator 50 tight, quiet and weather-resistant with a genuine Polaris Rear Brake Cable. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 3 Polaris models from 2007 to 2019. See the full fitment list below.
Rear Brake Cable at a Glance
-
OEM part number: 0453878
-
Brand: Polaris (genuine factory part)
-
Part type: Control Cables
-
Fits: Outlaw ATV and Predator ATV models, 2007–2019
-
Condition: New
Polaris Models and Years This Rear Brake Cable Fits
Genuine Polaris part #0453878 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Outlaw ATV Fitment
| Model |
Model Years |
| Polaris Outlaw 50 |
2008–2019 |
| Polaris Outlaw 50 MD (International) |
2017–2019 |
Polaris Predator ATV Fitment
| Model |
Model Years |
| Polaris Predator 50 |
2007 |
Why Choose a Genuine Polaris OEM Rear Brake Cable?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #0453878
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Rear Brake Cable Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #0453878 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Brake Cable with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Rear Brake Cable?
The genuine Polaris part number is 0453878. Use it to match this part to your factory parts diagram.
Which Polaris models does part #0453878 fit?
It fits the Outlaw 50 (2008–2019); Outlaw 50 MD (International) (2017–2019); Predator 50 (2007).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Rear Brake Cable Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Rear Brake Cable, OEM part #0453878, from Witchdoctors today and keep your Outlaw 50 or Predator 50 running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Haspin Acres — Laurel, Indiana: about 100 miles of trails
-
Spearhead Trails — southwest Virginia: a multi-trail system across the Virginia coalfields