Genuine Yamaha Brake Pad Pin — OEM Part #3FV-25924-00-00
Nothing matters more on a steep descent or with a loaded rack than brakes you can trust. The genuine Yamaha Brake Pad Pin restores factory braking on your Yamaha ATV or side-by-side, matching the original fittings, dimensions and specification.
Lines, calipers, drums, master cylinders, pads, shoes and parking brakes work as one system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 107 Yamaha models from 2004 to 2026. See the full fitment list below.
Brake Pad Pin at a Glance
-
OEM part number: 3FV-25924-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Brake Calipers & Components
-
Fits: Rhino side-by-side, Viking utility side-by-side and Wolverine recreation side-by-side models, 2004–2026
-
Condition: New
Yamaha Models and Years This Brake Pad Pin Fits
Genuine Yamaha part #3FV-25924-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 107 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Rhino side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Rhino |
2004–2005 |
3 |
| Yamaha Rhino 450 |
2006–2009 |
7 |
| Yamaha Rhino 660 |
2004, 2006–2007 |
12 |
| Yamaha Rhino 660F |
2004–2007 |
1 |
| Yamaha Rhino 700 |
2008–2009, 2011–2013 |
14 |
| Yamaha Rhino 700FI |
2009 |
1 |
Yamaha Viking utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Viking |
2014–2026 |
15 |
| Yamaha Viking VI |
2015–2025 |
11 |
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2016–2018, 2024 |
5 |
| Yamaha Wolverine R |
2016–2018 |
1 |
| Yamaha Wolverine R-Spec |
2016–2018 |
4 |
| Yamaha Wolverine X2 |
2019–2026 |
18 |
| Yamaha Wolverine X4 |
2018–2026 |
15 |
Why Choose a Genuine Yamaha OEM Brake Pad Pin?
- Factory specification for proper feel
- Direct fit with original calipers, drums, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM brake part, part #3FV-25924-00-00
- Original fittings, banjo bolts and mounting points
- Built to Yamaha's brake system specification
- Designed for mud, water and steep terrain
- Works with the brake fluid specified in your manual
Materials and Construction
Yamaha brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with fluid-compatible seals, and steel rotors, drums, pads and shoes designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal or lever
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads, shoes, rotors or drums
- Restoring a parking brake that will not hold
Signs Your Brake Pad Pin Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or worn rotors or drums
- A parking brake that will not hold on a slope
Installation Tips
- Use the Yamaha parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #3FV-25924-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Brake Pad Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Brake Pad Pin?
The genuine Yamaha part number is 3FV-25924-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #3FV-25924-00-00 fit?
It fits 107 Yamaha Rhino, Viking and Wolverine models from 2004 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Yamaha owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3 or 4.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors or drums with pads or shoes?
Not always. Measure them against the minimum service spec and check for scoring or warping.
Order Your Genuine Yamaha Brake Pad Pin Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Brake Pad Pin (part #3FV-25924-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.