All Balls Brake Pad Pin Kit 18-7029
Restore strong, consistent stopping power with the All Balls Brake Pad Pin Kit 18-7029.
Brakes take heat, mud and water on every ride. Worn pads, scored rotors, stuck pistons and leaking seals all reduce stopping power.
At a Glance
-
Brand: All Balls Racing
-
Part number: 18-7029
-
Product type: Brake Calipers & Components
About All Balls Racing
All Balls Racing makes replacement bearings, seals, brake parts, axles, fuel system parts and more for motorcycles, ATVs and UTVs. Its parts are designed as direct OEM replacements, often with upgrades over the original design, at a price that makes regular maintenance affordable.
Product Details
Each kit contains enough replacement pins for one caliper High quality bolts have pre-applied thread locking compound Retaining clips are included when necessary
Signs It's Time to Replace
- Grinding or squealing
- Soft or spongy lever or pedal
- Pulling to one side
- Leaking fluid at the caliper or master cylinder
Fitment
All Balls part numbers are application-specific. Match part number 18-7029 to your year, make and model in the All Balls application guide, or contact us with your year, make and model and we will confirm fit before you order.
Why Choose All Balls?
- Restores stopping power
- Direct OEM-replacement fit
- All Balls quality at a fair price
- Covers pads, rotors, calipers and rebuild parts
Common Uses
- Routine brake service
- Rebuilding seized calipers
- Replacing worn rotors
- Restoring an older machine
Installation Overview
- Protect painted parts from brake fluid.
- Remove the worn parts following your service manual.
- Clean components and install the new parts with the supplied seals or hardware.
- Refill with the correct DOT fluid and bleed until firm.
- Bed in new pads and test at low speed.
Follow your service manual and the included instructions. Not sure about doing it yourself? Read when to seek professional help or DIY.
Tips from the Witchdoctors Garage
- Bed in new pads.
- Use new crush washers on banjo bolts.
- Clean rotors with brake cleaner.
- Check pad thickness often after muddy rides.
Complete the Job
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the All Balls part number?
The part number is 18-7029. All Balls parts are listed by application, so use this number to confirm fit.
Is this genuine All Balls?
Yes. Witchdoctors sells genuine All Balls Racing parts.
What brake fluid do I use?
Use the DOT type shown on the master cylinder cap.
Should I replace pads and rotors together?
If rotors are below minimum thickness or warped, yes.
Will this fit my machine?
Check the make listed and confirm with your year and model.
How fast does Witchdoctors ship?
See how long it will take to receive your order for current timing.
Order Your All Balls Brake Part Today
Get back to riding with a part built to fit and last. Order the All Balls Brake Pad Pin Kit 18-7029 from Witchdoctors today.
Where to Ride Off-Road
Ready to put it to work? These off-road parks welcome ATVs and UTVs. Check current rules, road conditions and permit requirements before you go.