Brake Pedal by Can-Am

Can-Am UTV / ATV and Side by Side Original Equipment Manufacturer OEM Pedals & Components - Available at buywitchdoctors.com

Product Specifications: Genuine OEM Can-Am Brake Pedal, Part # 705601930.

When you are accelerating out of deep ruts, braking on steep declines, or maintaining precision throttle control over technical rock climbs, your foot pedals are your direct connection to your machine's powertrain. Keep your ride safe, responsive, and completely predictable with premium Can-Am UTV/ATV OEM Pedals & Components. Engineered specifically for your vehicle's cockpit and linkage assembly, these genuine Original Equipment Manufacturer parts restore the precise lever feel, return tension, and non-slip traction your off-road machine had when it first left the factory. Do not risk sticking throttles, loose brake links, or cheap aftermarket foot-control snap failures.

Every genuine Can-Am foot control component and pedal pad offers exceptional wear resistance and flawless floorboard integration. These assemblies undergo strict factory validation to survive heavy mud packing, aggressive boot scrubbing, and extreme sub-zero weather conditions. Whether you are replacing a worn, slick brake pedal pad on a hard-working utility vehicle or overhauling the electronic throttle position sensor linkage on a sport side-by-side, choosing official OEM parts ensures your inputs translate to instant vehicle response on every ride.

Why Choose Factory-Direct Can-Am OEM Pedals & Foot Controls?

Off-road foot wells are constantly exposed to water, mud, grit, and high physical pressure. Cheap universal pedal covers or unrated aftermarket mechanical link kits wear smooth quickly, causing your boots to slip off when you need control the most, or they rust up and jam. Upgrading or replacing your cockpit hardware with a genuine factory pedal assembly delivers crucial performance advantages that maximize operating safety.

• High-Traction Grip Surfaces: Designed with deep factory-molded rubber ridges or aggressive metal teeth to prevent boot slippage in wet or muddy conditions.
• Precision Electronic Calibration: Smart throttle assemblies feature factory-tuned sensors that sync flawlessly with your vehicle's ECM for smooth, linear power delivery.
• Heavy-Duty Structural Metallurgy: Cast and forged from high-tensile steel or aluminum to resist bending under emergency brake pressure or impact shocks.
• Corrosion-Proof Protection: Finished with durable factory anti-rust coatings to survive continuous exposure to water, salt, and abrasive soil.
• Factory Return Tension: Uses original-spec heavy-duty return springs to eliminate sluggish mechanical play or sticking pedals.

Essential Pedals & Components Parts and Accessories

Maintaining clear control and physical safety inside the cab requires keeping every pin, spring, and pad in perfect condition. We stock a comprehensive selection of original support components to fully refresh your setup:

• Complete Electronic Throttle and Accelerator Pedal Assemblies
• Heavy-Duty Foot Brake Pedal Levers and Arms
• Non-Slip Molded Rubber Brake Pedal Pads and Covers
• OEM High-Tensile Return Springs and Pivot Pins
• Throttle Position Sensors (TPS) and Plug-and-Play Wiring Connectors
• Brake Light Pressure Switches and Linkage Bushings

Comprehensive Vehicle Fitment Matrix (2015-Current)

• Can-Am Maverick Series: MAX, X3, XMR, XRS, XDS, Trail 700, 800, 1000, Sport, R.
• Can-Am Defender Series: XT, XTP, XMR, XXC, Lone Star, DPS, Limited, MAX, MAX XT, PRO.
• Can-Am Commander Series: 800R, 1000, XT, XTP, XMR, MAX, MAX XT, MAX XMR.
• Can-Am Outlander ATV Series: 450, 500, 570, 650, 700, 850, 1000R, MAX, PRO.
• Can-Am Renegade Series: 500, 570, 650, 800, 850, 1000, XMR.
• Can-Am Renegade Youth Model Series: EFI, DS, 70, 90, 110, XC 110.
• Can-Am DS Series: 70, 90, 110, 250, 450.

Frequently Asked Questions

Why should I buy an OEM gas or brake pedal instead of an aftermarket cover?

Original Equipment Manufacturer (OEM) parts replace the structural assembly rather than just clamping onto existing worn parts. They guarantee correct leverage, exact sensor signals, and compliance with factory safety overrides. Aftermarket covers can slip loose, catch on floor mats, or block full pedal travel, which is highly dangerous.

What are the signs that my electronic throttle pedal assembly is failing?

Common signs include a delayed engine response when pressing the gas, a sudden drop into limp mode accompanied by a check engine light, erratic idling, or a total loss of throttle signal. If your pedal feels loose or fails to spring back immediately when you lift your foot, it must be replaced.

Do these assemblies include the installation pivot bushings?

Depending on the specific factory part number, some full pedal kits include matching low-friction pivot bushings and pins, while others are sold as individual arms or pads. Please check the product specifications tab on our website to ensure you get all the installation pieces your project requires.

PRO TIP: Learn more about UTV Electronic Accelerator Pedal Symptoms & Fixes.

PRO TIP: Learn more on Does Your UTV or ATV Brake Pedal Sink But No Fluid Loss?

Restore Ultimate Foot Control — Order Today From Witchdoctors

Do not let a slippery brake pad or a sticky, worn-out throttle assembly compromise your safety or ruin your performance on the trails. Bring back responsive acceleration, secure braking power, and true factory reliability with new Can-Am UTV/ATV OEM Pedals & Components from Witchdoctors.com. Benefit from our lightning-fast shipping times, premium customer service, and verified factory fitment. Click Add to Cart now to service your cabin controls and conquer the wilderness with total confidence!

Are You Looking to Find Great Places & Adventurous Trails to Ride Your UTV, Side by Side or ATV? Check out these highly recommended places:

• Mines & Meadows
• Mountain Ridge ATV Park
• Busco Beach ATV/ UTV Park
• Indian Mountain ATV/UTV Park
• Wildcat Offroad Park

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.