Genuine CFMoto Brake Reservoir Bracket — OEM Part #5UWB-030110
Nothing matters more on a steep descent than brakes you can trust. The genuine CFMoto Brake Reservoir Bracket restores factory braking performance on your CFMoto ATV or UTV, matching the original fittings, dimensions and hydraulic specification.
Brake lines, calipers, master cylinders, pads, rotors and parking brakes work as a hydraulic and mechanical system. A leak, worn part or wrong fitting can lead to a soft pedal or brake failure. This part is confirmed for 12 CFMoto models from 2019 to 2025. See the full fitment list below.
Brake Reservoir Bracket at a Glance
-
OEM part number: 5UWB-030110
-
Brand: CFMOTO (genuine factory part)
-
Part type: Master Cylinders & Components
-
Fits: UForce utility UTV and ZForce sport UTV models, 2019–2025
-
Condition: New
CFMoto Models and Years This Brake Reservoir Bracket Fits
Genuine CFMoto part #5UWB-030110 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2025 |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
| CFMoto UForce U10 Pro |
2025 |
| CFMoto UForce U10 Pro Highland |
2025 |
| CFMoto UForce U10XL Pro |
2025 |
| CFMoto UForce U10XL Pro Highland |
2025 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2022 |
Why Choose a Genuine CFMoto OEM Brake Reservoir Bracket?
- Factory hydraulic specification for proper pedal feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping power
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM brake part, part #5UWB-030110
- Matches original fittings, banjo bolts and mounting points
- Built to CFMoto's brake system specification
- Designed for mud, water and steep terrain
- Works with DOT brake fluid as specified in your manual
Materials and Construction
CFMoto brake parts use reinforced rubber or braided brake hose, steel hard lines and fittings, aluminum caliper and master-cylinder bodies with rubber seals compatible with DOT fluid, and steel rotors and friction pads designed for off-road conditions.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking brake pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Brake Reservoir Bracket Needs Replacing
- Spongy pedal or lever, or one that sinks to the floor
- Brake fluid leaks at lines, fittings or calipers
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that does not hold on a slope
Installation Tips
- Use the CFMoto parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from brake fluid and cap open lines to keep dirt out.
- Install the new part with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the type listed in your manual and bleed the system fully.
- Test pedal or lever firmness and brake function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5UWB-030110 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Brake Reservoir Bracket and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Brake Reservoir Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Brake Reservoir Bracket?
The genuine CFMoto part number is 5UWB-030110. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5UWB-030110 fit?
It fits 12 CFMoto UForce and ZForce models from 2019 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT fluid type specified in your CFMoto owner's manual or on the master-cylinder cap. Do not mix DOT 5 (silicone) with DOT 3, 4 or 5.1.
Do I need to bleed the brakes after replacing this part?
Yes, any time the hydraulic system is opened. Air in the lines causes a soft pedal or lever.
Should I replace rotors when I change pads?
Not always. Measure rotor thickness and check for scoring or warping. If it is below the minimum spec, replace it.
Order Your Genuine CFMoto Brake Reservoir Bracket Today
Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto Brake Reservoir Bracket (part #5UWB-030110) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.