Genuine CFMoto Bumper Rail — OEM Part #5ASV-230301-6000-0BP00
Rocks, stumps and ledges take a toll on the underside and front end of any machine. The genuine CFMoto Bumper Rail restores factory protection on your UForce 600, bolting to the original mounting points so it absorbs hits the way CFMoto engineered it to.
Bumpers, skid plates and guards are your machine's first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 1 CFMoto model from 2023. See the full fitment list below.
Bumper Rail at a Glance
-
OEM part number: 5ASV-230301-6000-0BP00
-
Brand: CFMOTO (genuine factory part)
-
Part type: Front Bumper
-
Fits: UForce utility UTV models, 2023
-
Condition: New
CFMoto Models and Years This Bumper Rail Fits
Genuine CFMoto part #5ASV-230301-6000-0BP00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2023 |
Why Choose a Genuine CFMoto OEM Bumper Rail?
- Bolts to factory mounting points, with no drilling
- Shields expensive components from rocks, stumps and debris
- Engineered to work with the factory frame and ground clearance
- Cheaper than repairing the parts it protects
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM protection part, part #5ASV-230301-6000-0BP00
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built to take repeated trail impacts
Materials and Construction
CFMoto protection parts are typically made from steel tube, stamped steel, aluminum or high-density polyethylene (HDPE), depending on location. Each is finished to resist corrosion from mud, water and road salt.
Common Reasons Riders Replace This Part
- Rock crawling and technical trail riding
- Farm and ranch work around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate after an impact
- Restoring factory protection on a used machine
Signs Your Bumper Rail Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Gouges deep enough to weaken the part
- Rust-through on steel components
- Damage to the parts behind the guard
Installation Tips
- Support the machine safely on stands if you are working underneath.
- Use the CFMoto parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install the new part with fresh hardware where needed, applying thread locker if the service manual calls for it.
- Tighten to the specified torque and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Recommended Accessories and Maintenance Supplies
Pair your Bumper Rail with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Bumper Rail?
The genuine CFMoto part number is 5ASV-230301-6000-0BP00. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5ASV-230301-6000-0BP00 fit?
It fits the UForce 600 (2023).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Is this as strong as an aftermarket bumper or skid plate?
It is built to CFMoto's factory standard for the listed models. Aftermarket armor may be heavier-duty, but the OEM part fits the factory mounts exactly and keeps the original weight and ground clearance.
Can I mount a winch with this part?
Only if the CFMoto parts diagram shows a winch mount for your model. Otherwise, use the dedicated winch mount listed for your machine.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. It is good practice to replace damaged bolts and use fresh thread locker.
Order Your Genuine CFMoto Bumper Rail Today
Get your UForce 600 back to factory condition. Add the genuine CFMoto Bumper Rail (part #5ASV-230301-6000-0BP00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.